At The Back Of The Pack
Arm chair racerAt the back of the pack
Does DWT still make an 11x6 front wheel for the ATCs in a polished finish? When I went through my R I bought a premounted Cheng Shin knobby on a polished DWT red label and love it. Now I'm trying to find the same setup for my X. I've found the same Cheng Shin but can't find a polished DWT red label in an 11x6, all I've came across is one in black on Ebay. Thanks.
Jason
85 ATC 250R - restored stock other than 18" rears, nerf bars, Honda key switch, 14T front sprocket, and white tank and plastics (except rad shrouds)
87 ATC 200X - restored stock other than 18" rears and nerf bars
84 TRX 200 - rough but complete budget restore for wife and eventually daughters to bum around on
Eton Viper 50cc - oldest daughter's current ride
At The Back Of The Pack
Arm chair racerAt the back of the pack
Found one, apparently the Honda ATCs and the Tecate 3 share a bolt pattern, and the rim was listed under the Tecate.
Jason
85 ATC 250R - restored stock other than 18" rears, nerf bars, Honda key switch, 14T front sprocket, and white tank and plastics (except rad shrouds)
87 ATC 200X - restored stock other than 18" rears and nerf bars
84 TRX 200 - rough but complete budget restore for wife and eventually daughters to bum around on
Eton Viper 50cc - oldest daughter's current ride
Reply With Quote