//ArrowChat Code
Results 1 to 2 of 2

Thread: 1983 petcock

  1. #1
    Join Date
    Jul 2020
    Location
    Montana, USA
    --
    119

    1983 petcock

    I have removed the petcock on my 185s and the bushing is still in it and am unable to remove it. Am I supposed to remove it. My new valve won't fit in the bushing and is a little smaller than the hole if bushing was removed. Does this matter

  2. #2
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,722
    Grab it and pull it out with needle nose pliers . That’s the old filter .
    Can also push it into the tank and get it out threw the cap .
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

//ArrowChat Integreation Code //