//ArrowChat Code
Results 1 to 4 of 4

Thread: Tri-Moto throttle cable help (Pics)

  1. #1
    Join Date
    Feb 2005
    Location
    Canada
    --
    663

    Question Tri-Moto throttle cable help (Pics)

    So the upper portion of the throttle cable snapped on my Tri-Moto 175.

    It's connected to two other cables inside a plastic sleeve, one going to the carb and the other going to the lower end of the motor.

    I'm just not sure how to get the single upper cable out of the plastic sleeve to attach the new one.

    Anyone have any experience with this before?
    Click image for larger version. 

Name:	20200912_153230.jpg 
Views:	11 
Size:	50.4 KB 
ID:	264291
    Click image for larger version. 

Name:	20200912_153321.jpg 
Views:	12 
Size:	72.8 KB 
ID:	264292
    Click image for larger version. 

Name:	20200912_153453.jpg 
Views:	8 
Size:	43.5 KB 
ID:	264293
    1984 Honda 250R
    1985 ATC 250SX
    1985 Tri-Z 250
    1983 Honda 250R
    1986 Honda 350X
    1983 Yamaha Tri-Moto 175
    1983 Honda Big Red 200

    1981 Honda ATC 110

  2. #2
    Join Date
    Mar 2014
    Location
    Bunbury Western Australia
    --
    62
    you have to disconnect the lower cable ends off the carby & oil pump. It will give you enough slack to install upper cable.

    82 Honda ATC 185s SOLD
    82 Honda ATC 185s restoration project (Restored & SOLD)
    81 Yamaha Tri-Moto YT125h (SOLD )
    82 Yamaha Tri-Moto YT175J
    83 Yamaha Tri-Moto YT175k
    83 Yamaha Tri-Moto YT175k (SOLD )
    85 Yamaha Tri-Z YTZ250N

  3. #3
    Join Date
    Feb 2005
    Location
    Canada
    --
    663
    Quote Originally Posted by Zoila View Post
    you have to disconnect the lower cable ends off the carby & oil pump. It will give you enough slack to install upper cable.
    If I have the oil pump disconnected and run pre-mix, is it safe to disconect the cable to the lower end?
    1984 Honda 250R
    1985 ATC 250SX
    1985 Tri-Z 250
    1983 Honda 250R
    1986 Honda 350X
    1983 Yamaha Tri-Moto 175
    1983 Honda Big Red 200

    1981 Honda ATC 110

  4. #4
    Join Date
    Mar 2014
    Location
    Bunbury Western Australia
    --
    62
    Quote Originally Posted by Yamaha Tri-Moto View Post
    If I have the oil pump disconnected and run pre-mix, is it safe to disconect the cable to the lower end?
    yes you can disconnect cable, plug oil intake on carby. Some people remove the pump altogether, including the plastic drive cog on inside of case, as that cog can get mashed up from pump seizing with no oil.

    82 Honda ATC 185s SOLD
    82 Honda ATC 185s restoration project (Restored & SOLD)
    81 Yamaha Tri-Moto YT125h (SOLD )
    82 Yamaha Tri-Moto YT175J
    83 Yamaha Tri-Moto YT175k
    83 Yamaha Tri-Moto YT175k (SOLD )
    85 Yamaha Tri-Z YTZ250N

//ArrowChat Integreation Code //