My buddy brought me his 86 200x for some carburetor work and new rear axle bearings. Also for me to ride and play around with which I'm excited about
Sent from my moto z4 using Tapatalk
My buddy brought me his 86 200x for some carburetor work and new rear axle bearings. Also for me to ride and play around with which I'm excited about
Sent from my moto z4 using Tapatalk
1985 200X
66mm H&S Piston
Little Bit Bigger Cam
Bassani Exhaust
1985 350X With Bassani Exhaust
1983 Honda 200E (PARTING OUT!!!!)
1985 Yamaha Tri-Zinger
My Feedback Threadhttp://http://www.3wheelerworld.com/showthread.php?105185-Feedback-for-RodKnockRacing&highlight=RodKnockRacing
Nice looking 2nd gen! They are alot of fun, not 350X or R fun, but pretty cool trikes!
Nice you get to dial it in and test ride at the same time
1985 200X
66mm H&S Piston
Little Bit Bigger Cam
Bassani Exhaust
1985 350X With Bassani Exhaust
1983 Honda 200E (PARTING OUT!!!!)
1985 Yamaha Tri-Zinger
My Feedback Threadhttp://http://www.3wheelerworld.com/showthread.php?105185-Feedback-for-RodKnockRacing&highlight=RodKnockRacing
If you ever need to replace the clutch please remember the crank shaft nut is reverse threads , I can’t tell you how many of these I’ve pulled apart that were F*** up from idiots stripping them out .
Looks like an awesome find BTW , congrats .
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10
1985 200X
66mm H&S Piston
Little Bit Bigger Cam
Bassani Exhaust
1985 350X With Bassani Exhaust
1983 Honda 200E (PARTING OUT!!!!)
1985 Yamaha Tri-Zinger
My Feedback Threadhttp://http://www.3wheelerworld.com/showthread.php?105185-Feedback-for-RodKnockRacing&highlight=RodKnockRacing
1985 200X
66mm H&S Piston
Little Bit Bigger Cam
Bassani Exhaust
1985 350X With Bassani Exhaust
1983 Honda 200E (PARTING OUT!!!!)
1985 Yamaha Tri-Zinger
My Feedback Threadhttp://http://www.3wheelerworld.com/showthread.php?105185-Feedback-for-RodKnockRacing&highlight=RodKnockRacing
I've almost done this before. Good thing I had an idea of how much force it needed to come off, and the 8 gallon air compressor wasn't plugged in. Impact = prolly bad idea. Sat back and thought about it for a sec.....oh sheeeeeeeeiiit. Lol. No damage done but I felt like an idiot. Close call.
1984 HONDA ATC200M - OG, mid-restoration
1981 HONDA ATC200 - future build
1981 HONDA ATC185S - parts
1984 ATC200X - roller, future build
1984 Honda ATC250r - in a million pieces- ISO grab bar, PM if you have one
Da velder
_______________________________________________
Feedback:
http://www.3wheelerworld.com/showthr...ck-for-Barnboy
Nice 2nd gen! Looks like a blast, never ridden one. Maybe some day. If you want an interesting read check out Dirtcrashers '86 200X build. Some serious knuckle bustin to get that thing out the door on schedule, did an incredible job for the time frame also.
http://www.3wheelerworld.com/showthr...-other-changes
1984 HONDA ATC200M - OG, mid-restoration
1981 HONDA ATC200 - future build
1981 HONDA ATC185S - parts
1984 ATC200X - roller, future build
1984 Honda ATC250r - in a million pieces- ISO grab bar, PM if you have one
Da velder
_______________________________________________
Feedback:
http://www.3wheelerworld.com/showthr...ck-for-Barnboy
Jason
85 ATC 250R - restored stock other than 18" rears, nerf bars, Honda key switch, 14T front sprocket, and white tank and plastics (except rad shrouds)
87 ATC 200X - restored stock other than 18" rears and nerf bars
84 TRX 200 - rough but complete budget restore for wife and eventually daughters to bum around on
Eton Viper 50cc - oldest daughter's current ride
I scored a PRM grab bar when they did one last run of parts before closing their doors for good.
There is a person in Maine that makes a nice replacement. Just look up ATD products on FB in the trike pages
Jason
85 ATC 250R - restored stock other than 18" rears, nerf bars, Honda key switch, 14T front sprocket, and white tank and plastics (except rad shrouds)
87 ATC 200X - restored stock other than 18" rears and nerf bars
84 TRX 200 - rough but complete budget restore for wife and eventually daughters to bum around on
Eton Viper 50cc - oldest daughter's current ride
Jason
85 ATC 250R - restored stock other than 18" rears, nerf bars, Honda key switch, 14T front sprocket, and white tank and plastics (except rad shrouds)
87 ATC 200X - restored stock other than 18" rears and nerf bars
84 TRX 200 - rough but complete budget restore for wife and eventually daughters to bum around on
Eton Viper 50cc - oldest daughter's current ride
Type in Craig Burton he lives in Maine. Or use ATD/ATC in the search bar. Hope this link works, he just made new swing arm skid plates for 350X
https://www.facebook.com/groups/1209...05992649836885
Jason
85 ATC 250R - restored stock other than 18" rears, nerf bars, Honda key switch, 14T front sprocket, and white tank and plastics (except rad shrouds)
87 ATC 200X - restored stock other than 18" rears and nerf bars
84 TRX 200 - rough but complete budget restore for wife and eventually daughters to bum around on
Eton Viper 50cc - oldest daughter's current ride