//ArrowChat Code
Results 1 to 3 of 3

Thread: Hi Guys, please help point me in the right direction tackling an 85 110 restoration.

  1. #1
    Join Date
    Oct 2020
    Location
    Central FL
    --
    1

    Hi Guys, please help point me in the right direction tackling an 85 110 restoration.

    So I have a 1985 110. the plastics are very good. the motor runs and starts well but its locked in gear and wont shift or roll. It has an aftermarket carb, and no exhaust. Its covered in surface rust and there is rust inside the tank. I am not looking to make a showroom specimen time capsule. I'd like to get it refreshed and reliable. where would you guys start?

  2. #2
    Join Date
    May 2006
    Location
    N.E. Ohio
    --
    2,005
    Have you played with the Hi/Lo selector it may be stuck between. Neutral is all the way down then try to wiggle it one way then the other

  3. #3
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,722
    Make sure it’s not the rear brake shoes , they will delaminate and jam up .
    Also check the chain , might be real loose and locking up .
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

//ArrowChat Integreation Code //