At The Back Of The Pack
Arm chair racerAt the back of the pack
I bought an oem carb gasket kit for my 83 185s. But I’m not sure what two of these pieces go to. Can anyone identify them? They don’t have part numbers, only a letter on the package. I thought the bigger one might have been the throttle cable seal but the stock one isn’t smooth and they have a separate part number for that part that’s not in the gasket kit.
1. 83 185s: (the money pit) xr200 cam, 200cc cylinder, 10.25:1 piston, 83 250r front end, 450r hubs, full suspension
2. 85 Big Red 250es: in pieces
3. 85 200m
4. 00 Polaris Magnum 325 2x4: stays broke
5. 02 Yamaha Wolverine 350 4x4: trail bike
Power User
The day begins with 3WW
Neither one of those are needed for a 185s carburetor . Those boots are used for a carburetor that has an accelerator pump .
It’s just a superseded kit for many carburetors .
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10
At The Back Of The Pack
Arm chair racerAt the back of the pack
Thanks Shortline
1. 83 185s: (the money pit) xr200 cam, 200cc cylinder, 10.25:1 piston, 83 250r front end, 450r hubs, full suspension
2. 85 Big Red 250es: in pieces
3. 85 200m
4. 00 Polaris Magnum 325 2x4: stays broke
5. 02 Yamaha Wolverine 350 4x4: trail bike
Reply With Quote