the beater 185 i have, someone pulled the hub out a inch and welded the hub to the axle on the splines.
I need the sprocket, so the hubs got to come off.
Is it worth trying to save the axle by grinding the welds, or just cut the axle? jim
Power User
Got the holeshot
the beater 185 i have, someone pulled the hub out a inch and welded the hub to the axle on the splines.
I need the sprocket, so the hubs got to come off.
Is it worth trying to save the axle by grinding the welds, or just cut the axle? jim
81 185s
82 185s with 85 200s motor
suspended 185s
85 atc70
1984 200s
85 350x 3rd owner
and a 72 ct70
projects coming along
85 200s
81 suspended 185s (can't believe I came across 2)
1982? 185s
First Time Rider
Arm chair racerNew to the board
Tough call. More than likely the splines are stripped out on either the hub, the axle, or both. Try to cut the weld first and see what you're working with.Originally Posted by Jim mac
Sent from my SM-G892A using Tapatalk
There is no replacement for displacement!!!!!!!!
ATC/ATVs owned:
85 250SX (rebuilding)
Power User
Got the holeshot
the same person took some golf cart? rims that didn't match up with the honda bolt pattern and welded the rims to the hubs on both sides. jim
81 185s
82 185s with 85 200s motor
suspended 185s
85 atc70
1984 200s
85 350x 3rd owner
and a 72 ct70
projects coming along
85 200s
81 suspended 185s (can't believe I came across 2)
1982? 185s
Power User
Got the holeshot
went out and really looked at the axle, they took some hubbthats not even a factory hub and welded it to the axle. then they welded the rim off-center to the rim so the wheel is off center. So tomorrow, out comes the saw zall. jim
81 185s
82 185s with 85 200s motor
suspended 185s
85 atc70
1984 200s
85 350x 3rd owner
and a 72 ct70
projects coming along
85 200s
81 suspended 185s (can't believe I came across 2)
1982? 185s
Just Too Addicted
Arm chair racerJust too addicted
I doubt you can cut the welds and save both pieces, junk it and find a new one.
1984 HONDA ATC200M - OG, mid-restoration
1981 HONDA ATC200 - future build
1981 HONDA ATC185S - parts
1984 ATC200X - roller, future build
1984 Honda ATC250r - in a million pieces- ISO grab bar, PM if you have one
Da velder
_______________________________________________
Feedback:
http://www.3wheelerworld.com/showthr...ck-for-Barnboy
Power User
Got the holeshot
The hubs tend to wear their inners before the harder axle. I can’t tell you how many times I’ve seen this done on Zinnger YT60’s. You’d be better off with complete hub axle bearings chain and sprockets rims and tires. If you ad up your parts list it might serve you to find another same model unit. This is a scrap yard near me www.cyclesrus.net might get lucky never know what they might have. It really depends on how beat is the machine you have and can your budget go an extra mile for the nicer less new unit keeping, or parting out what you have.
Power User
Got the holeshot
fortunately I already have a extra axle and hubs. Got them installed last night. I was just wondering if the welded axle was worth trying to keep. I'm just going to cut it tonight, get the sprocket mounted and the chain back on. tires should be here Friday, my 81 185 with plates and title will get the new rubber, the project trike gets the used rubber. jim
81 185s
82 185s with 85 200s motor
suspended 185s
85 atc70
1984 200s
85 350x 3rd owner
and a 72 ct70
projects coming along
85 200s
81 suspended 185s (can't believe I came across 2)
1982? 185s
Got The Holeshot
Arm chair racerJust too addicted
Sorry that just reads nasty.
MrC.
mrc_builds on YouTube Channel
https://www.youtube.com/channel/UCmw...confirmation=1
My Addiction
85 200m "Tallahassee"
84 200x "SouthPort"
84 200x "Van Halen"
84 250r "lucky"
85 250sx "Enterprise"
85 350x "The Money Pit"
85 350x Code Red
86 250r "Unicorn"
86 trx250r
88 Lt250r Suzuki
mrc_builds saves trikes like Jimmy Swaggart saved souls back in the day -said Patriot1
Power User
Got the holeshot
yes it does, but got the axle cut, sprocket swapped, chain tensioned and installed. hubs installed, Now wait for the parts to show up. jim
81 185s
82 185s with 85 200s motor
suspended 185s
85 atc70
1984 200s
85 350x 3rd owner
and a 72 ct70
projects coming along
85 200s
81 suspended 185s (can't believe I came across 2)
1982? 185s
Reply With Quote