Has anyone installed a lectron carb on a stock atc 350x? If so what model/size was it?
Has anyone installed a lectron carb on a stock atc 350x? If so what model/size was it?
I talked them through email, and the suggested the 36mm or 40mm lectron. I wondering if someone hear had experience, because they cost quite a chunk of change.
It’s hard to tell what size the oem carb was, dirtwheels, says it’s 32mm and I’ve read in places that it is 34 or 36mm. Service manual indicates that it has venturi diameter of 31mm.
Get fcr carb instead
Sent from my iPhone using Tapatalk
TPC 450R
A lot of National racers with modified 200x guys run a CRF 150r carb to up the fuel delivery. Mickey Dunlap FourStroke Tech could be a source of info. I would think a FCR carb could work but the 2 cable setup might be an issue with the thumb lever. Used wise the FCR would be easy to find and custom cables can be made. Not sure what DirtCrasher used on his BigBore 350x but I know he posted a build post here yrs back. Keep us posted to your end results.
I run one throttle cable on my fcr carb and it works fine, it’s also a thumb throttle
Sent from my iPhone using Tapatalk
TPC 450R