which o rings for rims?

[Jim mac]

got my o rings in for my latest project. ordered them for a 81 185s and they are too small. I had 4 lug 2 piece rims. I looked at another set of rims that are 3 lug split rims and it looks like the o rings will fit that.
so what machine used a 8 inch split rim with the 4 lug so I can order the right orings? jim

[350for350]

I believe that the 185S did use a four bolt split rim for the 81 and 82 models. Are your rims the stock ones? I seem to remember that the o-rings were different between the 8" and 9" rims. Maybe they were also different between different years.

[ATC King]

Are the OEM Honda O-rings or some aftermarket ones?

The later ATC110 uses a 4 bolt, two piece wheel. I'm pretty certain all the later 185S used the same two piece wheels.

I just put one together with an OEM O-ring and no problems. I'll see if I have a picture of the part number.

Edit: Zoom in and you can see the part number. This was for a four bolt, two piece wheel. They technically have eight bolts, but yeah...four bolts holds them onto the hub.

[Jim mac]

I think that's the one I need. I tried a thick bead of silicone. jim