//ArrowChat Code
Results 1 to 2 of 2

Thread: 83 YT175 Tri-Moto carb pilot jet

  1. #1
    Join Date
    May 2020
    Location
    Antioch
    --
    8

    83 YT175 Tri-Moto carb pilot jet

    I picked up a new to me 2nd YT175 (sold the last one). Tri-moto sat for 20 years. I got spark and compression so I started to take the carb off and clean it, took me about 6 hours and i got everything super clean except I have one problem.
    I can't get the pilot jet out. I soaked it in gas for 24 hours then in tranny fluid. I still can't get the jet out. Has anyone had luck with the Chinese carbs on ebay?. What model is the carb? I don't see any numbers on it just says Mikuni. Can I drill out the pilot? LOL

  2. #2
    Join Date
    Apr 2014
    Location
    Edmond, KS
    --
    2,531
    You probably could drill the pilot jet and then use a small screw extractor to get it out.

//ArrowChat Integreation Code //