I recently purchased a big red and noticed on my test ride that reverse is just a shift down from neutral, no button and lever press. I’ve read a few threads and it seems as this is a problem that happens on the 250s. The cable isn’t currently hooked up at the lever. I followed the cable down to the bottom of the case and the little arm is down with no tension. I pryed it up as if the cable was hooked up and working properly but i could still shift down into reverse either way. Can someone point me to the right part i need to replace. Im assuming i need to crack the case open and see whats going on inside, while im there ill clean the oil screen and any other maintenance recommended. Thanks