//ArrowChat Code
Page 2 of 2 FirstFirst 1 2
Results 16 to 17 of 17

Thread: Centrifugal clutch seized on crankshaft

  1. #16
    Join Date
    Jan 2021
    Location
    Florida
    --
    14

    Back to report

    I know it has been a while since I have updated, but everything went back together and the Yamaha lives! My son and I have been riding for a while with no issues

    I never did locate a location for that little yellow spring and I never found another spring in there like it. When I went to put the cover on after installing all of the new parts, the crankshaft would not slide into the outer crank bearing in the case cover. The crank was mushroomed at the end from my attempts with the 3 jaw puller. So I patiently sanded the end of the crank until it would fit in the bearing perfectly. I also had to order a die to clean up the crankshaft threads for the centrifugal clutch assemblyís nut. They werenít that bad, but they had a couple of spatter bbís from welding.

    I told you guys I didnít want to leave this thread unresolved. Even though Iím a little late getting back, I guess itís better late than never lol. I will see if I still have the pics from when I put her back together and will post them here if I do
    1984 YTM 225 DX
    2004 CRF 150F

  2. #17
    Join Date
    Jan 2021
    Location
    Florida
    --
    14
    You lucky guys also get a video with some pics! Lol. Looks like I still had t on my phone. Here she is.

    https://imgur.com/gallery/0yLMZmS
    1984 YTM 225 DX
    2004 CRF 150F

//ArrowChat Integreation Code //