//ArrowChat Code
Results 1 to 5 of 5

Thread: Fender mounting hardware?

  1. #1
    Join Date
    Aug 2005
    Location
    SW Iowa
    --
    524

    Fender mounting hardware?

    Can some one direct me to who/where i can buy fender mounting hardware? I am referring to the special screws and rubber grommets and even mud flaps (if those are even available anywhere... Ive checked Maier but looks like they only do plastics. specifically looking for 85 250sx and 86 200x. Thanks!
    1986 200X
    1985 250SX
    1982 200E
    1978 ATC90

  2. #2
    jasong_10's Avatar
    jasong_10 is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Apr 2020
    Location
    Croghan, New York
    --
    420
    In regards to the grommets there is a member on here that repops a lot of the rubber pieces on these trikes. He does great work.
    Jason

    85 ATC 250R - restored stock other than 18" rears, nerf bars, Honda key switch, 14T front sprocket, and white tank and plastics (except rad shrouds)

    87 ATC 200X - restored stock other than 18" rears and nerf bars

    84 TRX 200 - rough but complete budget restore for wife and eventually daughters to bum around on

    Eton Viper 50cc - oldest daughter's current ride

  3. #3
    Join Date
    Aug 2005
    Location
    SW Iowa
    --
    524
    Any idea who said member is? How about the screws and special washer/spacers? Surely Im not the only one in need of such hardware...��♂️
    1986 200X
    1985 250SX
    1982 200E
    1978 ATC90

  4. #4
    Join Date
    Aug 2016
    Location
    East of Worcester ma
    --
    1,326
    Sounds like your looking for the front fender mounting hardware? I think someone repops those collars-(3ww store maybe) I dont offer the rubber for the front fender either, hmmm i may need to look into doing those someday. Or which rubbers are u exactly looking for? I have a just a few oddball rubbers available for different bikes.

    shep

    I have no 250sx items. (yet)

  5. #5
    jasong_10's Avatar
    jasong_10 is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Apr 2020
    Location
    Croghan, New York
    --
    420
    That guy ^^^^^^
    Jason

    85 ATC 250R - restored stock other than 18" rears, nerf bars, Honda key switch, 14T front sprocket, and white tank and plastics (except rad shrouds)

    87 ATC 200X - restored stock other than 18" rears and nerf bars

    84 TRX 200 - rough but complete budget restore for wife and eventually daughters to bum around on

    Eton Viper 50cc - oldest daughter's current ride

//ArrowChat Integreation Code //