//ArrowChat Code
Results 1 to 2 of 2

Thread: ISO cleaner joint for 83 ytm200l

  1. #1
    Join Date
    Jan 2008
    Location
    Washington
    --
    1

    ISO cleaner joint for 83 ytm200l

    I just recently got a new carb for my 83 ytm200. Originally this was a ytm200k, but based on lack of carbs to swap out for that dual slip style, I got a bolt on flange style carb. The biggest issue was the air cleaner to carb joint was shifted with a mismatch of half of the carb being needed to shift outboard to reach to the hose. Looking online, I found part number 24w-14453-00-00 seems to be the part number, but I’m struggling to find one that doesn’t seem like it’s too much money.

  2. #2
    Join Date
    Jul 2010
    Location
    Arkansas
    --
    2,196
    I done the same type carb swap on my '83 200K, but didn't have that issue. I used a OEM flange manifold. Did you use one of the aftermarket (Chinese) manifolds?

    As for finding cheap parts, it's not worth the problems when OEM is still available. What's 'too much money,' is point of view. What's seemingly expensive now, will just get more so once it becomes NOS. $80 for a major part that can't be found anywhere else isn't 'too much money' in my book

    https://www.ebay.com/itm/YAMAHA-AIR-...0/253026376322

    Owning and repairing trikes is no longer a short funds hobby.
    The story of three wheels and a man...

//ArrowChat Integreation Code //