I recently bought a 1983 ytm200 and saw that the exhaust wasn't mounted fully to the engine because it didn't fit right. So I bought an original exhaust and fixed that problem, but I am wondering what to do with the other one. Does anyone know what model it fits so I could possibly sell it?
If you can’t get it to bolt to the head because it’s hitting your frame it’s most likely for a YTM 225 or a 4 Moto.
If so, it can be used on a YTM 200 by cutting the head pipe a few inches from the head flange mount (right about where the bolt on flange is in the first photo) and bolting it on and then mounting the rear section to determine the length of tube you need to weld in so that the curved loop of the head-pipe clears the down tube of the frame.
Last edited by El Camexican; 04-08-2021 at 07:16 AM.
First Time Rider
Arm chair racerNew to the board
Reply With Quote