Originally Posted by
Zlonsdale
Hi all,
I just purchased a Honda atc 90 and atc 110 non running and I was wondering what sort of maintenance I should do before ripping. I saw somewhere that there is fluid in the final drive/diff housing and I was wondering what fluid needs replaced there. As well what kinda compression is needed just to start?
Thanks,
Zlonsdale
No differential fluid. I really wouldn’t worry about compression at this point, check for spark and fuel and pull the rope. We’ve never checked compression on any of the 50 or so 90/110’s we’ve flipped and owned. You can pretty much tell by pulling the rope if you have enough to start it.
90 nickolson Bored and Stroked "The Good"
Big Bore 110 Pauter frame "The Bad"
90 Bored and Stroked “vey’s frame” "The Ugly"
110 JSC frame Bored and Stroked
flat track build. “Shop trike”
1974 original 90 X 2
1974 Original 70.