//ArrowChat Code
Results 1 to 5 of 5

Thread: Engine Builder Recommendations?

  1. #1
    Join Date
    Nov 2020
    Location
    US
    --
    25

    Engine Builder Recommendations?

    I have a 1984 atc200x and the other day during a ride the engine locked up tight. Kickstart won't move and shifter won't move up or down. Been wanting more power out of it anyways, and what better time than now. Considering rebuilding myself but I know there's shops out there that could build a better engine than I could. Anyone have any recommendations for a legitimate shop to build this little engine?

    Sent from my Pixel 2 XL using Tapatalk

  2. #2
    Join Date
    May 2006
    Location
    Not here
    --
    4,728
    I've used Mike Baker ('shortline10') and Brendon Yeager (yeagerb) from here. I'm sure there are others

    Both are skilled with the 200X

    Sent from my motorola one 5G ace using Tapatalk

  3. #3
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,650
    If you want to pull the motor and ship it to me I can rebuild it . I’m in south Florida .
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

  4. #4
    Join Date
    Nov 2020
    Location
    US
    --
    25
    Quote Originally Posted by shortline10 View Post
    If you want to pull the motor and ship it to me I can rebuild it . Iím in south Florida .
    What are my options? Been looking at stroker kits for a while now. Not sure what's all done to the engine now as I've never been inside this one. Guy said it should be .030 over. All I know is that this is my favorite trike to date but it needs more than 10 horse haha.

    Sent from my Pixel 2 XL using Tapatalk

  5. #5
    Join Date
    Nov 2020
    Location
    US
    --
    25
    Thought I'd give a little update into what happened. Way worse than I originally thought. Rod snapped on both ends, oem 65mm piston shattered, sleeve busted and many cracks, rod was hitting the the case and all the shrapnel was stopping the transmission gears from rotating. Crank bearing are like brand new yet somehow. Got a complete gasket set with seals, billet 3rd gear from Greg Jr. DID timing chain, timing chain slide and adjuster, and currently awaiting my specbolt stainless bolt kit for the engine and shipping the engine out to Tom Carlson at TC Racing to have him work his magic on this old engine.

    Sent from my Pixel 2 XL using Tapatalk

//ArrowChat Integreation Code //