//ArrowChat Code
Results 1 to 4 of 4

Thread: 1986 200x carb help please

  1. #1
    Join Date
    Jun 2009
    Location
    Tunkhannock,Pa
    --
    904

    1986 200x carb help please

    I did a full rebuild on the stock carb had it dip cleaned. Which means I removed the pilot screw and yes I know count how many turns when taking it out well I didn't do that. My mistake So I need to know how many turns in to the stock position. The manual says 2 turns out from a lightly seated position but can't seem to figure that out. I really appreciate any help Thanks

    Sent from my moto z4 using Tapatalk
    1985 200X
    66mm H&S Piston
    Little Bit Bigger Cam
    Bassani Exhaust

    1985 350X With Bassani Exhaust

    1983 Honda 200E (PARTING OUT!!!!)

    1985 Yamaha Tri-Zinger


    My Feedback Threadhttp://http://www.3wheelerworld.com/showthread.php?105185-Feedback-for-RodKnockRacing&highlight=RodKnockRacing

  2. #2
    Join Date
    Jun 2009
    Location
    Tunkhannock,Pa
    --
    904
    Quote Originally Posted by RodKnockRacing View Post
    I did a full rebuild on the stock carb had it dip cleaned. Which means I removed the pilot screw and yes I know count how many turns when taking it out well I didn't do that. My mistake So I need to know how many turns in to the stock position. The manual says 2 turns out from a lightly seated position but can't seem to figure that out. I really appreciate any help Thanks

    Sent from my moto z4 using Tapatalk
    Also it runs with a cheap repop carb with keihin jets. Just trying to get the stock carb figured out

    Sent from my moto z4 using Tapatalk
    1985 200X
    66mm H&S Piston
    Little Bit Bigger Cam
    Bassani Exhaust

    1985 350X With Bassani Exhaust

    1983 Honda 200E (PARTING OUT!!!!)

    1985 Yamaha Tri-Zinger


    My Feedback Threadhttp://http://www.3wheelerworld.com/showthread.php?105185-Feedback-for-RodKnockRacing&highlight=RodKnockRacing

  3. #3
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,722
    Tune that screw for the best smooth steady idle , if it has the correct size small jet it should be anywhere from 1-3 turns out . The factory setting is just a starting point .
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

  4. #4
    Join Date
    Jun 2009
    Location
    Tunkhannock,Pa
    --
    904
    Quote Originally Posted by shortline10 View Post
    Tune that screw for the best smooth steady idle , if it has the correct size small jet it should be anywhere from 1-3 turns out . The factory setting is just a starting point .
    Thanks Mike

    Sent from my moto z4 using Tapatalk
    1985 200X
    66mm H&S Piston
    Little Bit Bigger Cam
    Bassani Exhaust

    1985 350X With Bassani Exhaust

    1983 Honda 200E (PARTING OUT!!!!)

    1985 Yamaha Tri-Zinger


    My Feedback Threadhttp://http://www.3wheelerworld.com/showthread.php?105185-Feedback-for-RodKnockRacing&highlight=RodKnockRacing

//ArrowChat Integreation Code //