//ArrowChat Code
Results 1 to 3 of 3

Thread: How do I remove the exhaust pipe/muffler

  1. #1
    Join Date
    Aug 2021
    Location
    Yakima, Washington
    --
    20

    How do I remove the exhaust pipe/muffler

    Hi i recently acquired a "junk" atc 90 but after working on it, it fired and runs like a champ i had to cut a section of the exhaust out, (the part that runs under the engine), and I'm not sure how to remove the rear section of the muffler any help is appreciated!

  2. #2
    Join Date
    Jul 2021
    Location
    MT
    --
    27
    should just slide out towards the front. I had one that had a hole and was caught on something, I just beat the hell out of it until it came out. a bolt or something was catching on the side and wouldn't allow it to slide out. torn a hole in the side of the muffler, but i didn't care because i was replacing it anyways.

  3. #3
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,432
    Left side center bolt on the chain case cover has a long bolt that runs threw the muffler . Remove the skid plate and it should pull out .
    The hole in the middle of the muffler has a 6mm long bolt .

    https://www.partzilla.com/catalog/ho...c110-a/muffler
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

//ArrowChat Integreation Code //