digging thru my stash of junk for the auto x build. found this intake, the short one is a 185 or 200s the long one? jim
ps pardon my feet. jim
digging thru my stash of junk for the auto x build. found this intake, the short one is a 185 or 200s the long one? jim
ps pardon my feet. jim
81 185s
82 185s with 85 200s motor
suspended 185s
85 atc70
1984 200s
85 350x 3rd owner
and a 72 ct70
projects coming along
85 200s
81 suspended 185s (can't believe I came across 2)
1982? 185s
The long one looks to be an 86/87 200x. The only 86/87 200x i could easily put my hands on has a bit of epoxy on the outside, but comparing your pic to mine it looks correct- the oring end of the 200x hole size is 27mm. The fatcat or trx200sx look very similar but angle is off a bit and hole at the oring end of those is 23mm.
hope this helps-
shep
thanks. last 87 200x I bought came with a 86 motor installed and the original 87 motor in a basket. when I sold the trike (yes I'm a idiot) I included the basket case motor but I'm pretty sure I kept the intake for a future auto x build but it looks like the manifold doesn't bolt up to a 185s head. jim
81 185s
82 185s with 85 200s motor
suspended 185s
85 atc70
1984 200s
85 350x 3rd owner
and a 72 ct70
projects coming along
85 200s
81 suspended 185s (can't believe I came across 2)
1982? 185s
I think those 86-87 200x intakes if in good shape are selling for about a $100 on ebay now.
Or stash it back away for five yrs it may be worth $200
shep
I really need to learn to ebay stuff. when I get the motor installed in the 85 frame, I'll see if it migjt work. also threw a local ad out to see if I can trade it for the parts I need. jim
81 185s
82 185s with 85 200s motor
suspended 185s
85 atc70
1984 200s
85 350x 3rd owner
and a 72 ct70
projects coming along
85 200s
81 suspended 185s (can't believe I came across 2)
1982? 185s