//ArrowChat Code
Page 2 of 2 FirstFirst 1 2
Results 16 to 20 of 20

Thread: Finally got a Honda z50!

  1. #16
    Join Date
    Jun 2010
    Location
    Cold Lake, Alberta, Canada
    --
    2,954
    Update: The cylinder is still in spec so I honed it a bit and will now start to gather new top end parts. I got a nice surprise when I removed the clutch and main gear to dig into the transmission issue and found it was just stuck between gears and shifts just fine once I rotated the bottom end 360 degrees. I'm guessing I can get this fixed up for less than I thought originally.
    Trikes
    1970/71 US 90 (Aquarius Blue)
    1970/71 US 90 (Future Resto Project)
    1972/73 US 90 Camo Project (110 Big Bore)
    1972/73 US 90 Green
    1977 ATC 90 w/83 110 motor (Fugly)
    1982 ATC 70
    1983 ATC 70 (Ladybug)
    1973 ATC 70

    1965 Marketeer 3 Wheel Golf Cart with 1986 Honda 250 drivetrain

    TF 2015

    Feedback http://www.3wheelerworld.com/showthr...ck-for-coopool
    http://www.3wheelerworld.com/showthr...k-for-coolpool

  2. #17
    Join Date
    Jun 2010
    Location
    Cold Lake, Alberta, Canada
    --
    2,954
    Ordered all parts today including extras like new chain and sprockets and new exhaust guard hardware to replace the badly rusted ones. I did have to go to eBay for an exhaust valve which kind of sucks. Everything else came from PhatMX out of Toronto, ON for around $450. All in this should be back up and running for less than $500.00 which is good for Canadian prices and horrible shipping costs. The most expensive thing was a new OEM kill switch at $134.00!
    Last edited by coolpool; 01-05-2023 at 09:33 AM.
    Trikes
    1970/71 US 90 (Aquarius Blue)
    1970/71 US 90 (Future Resto Project)
    1972/73 US 90 Camo Project (110 Big Bore)
    1972/73 US 90 Green
    1977 ATC 90 w/83 110 motor (Fugly)
    1982 ATC 70
    1983 ATC 70 (Ladybug)
    1973 ATC 70

    1965 Marketeer 3 Wheel Golf Cart with 1986 Honda 250 drivetrain

    TF 2015

    Feedback http://www.3wheelerworld.com/showthr...ck-for-coopool
    http://www.3wheelerworld.com/showthr...k-for-coolpool

  3. #18
    Join Date
    Jun 2010
    Location
    Cold Lake, Alberta, Canada
    --
    2,954
    A late Christmas present....my parts are here from PhatMX! Just waiting on the exhaust valve from eBay then I should be all set.
    Attached Thumbnails Attached Thumbnails IMG_0089r.jpg  
    Trikes
    1970/71 US 90 (Aquarius Blue)
    1970/71 US 90 (Future Resto Project)
    1972/73 US 90 Camo Project (110 Big Bore)
    1972/73 US 90 Green
    1977 ATC 90 w/83 110 motor (Fugly)
    1982 ATC 70
    1983 ATC 70 (Ladybug)
    1973 ATC 70

    1965 Marketeer 3 Wheel Golf Cart with 1986 Honda 250 drivetrain

    TF 2015

    Feedback http://www.3wheelerworld.com/showthr...ck-for-coopool
    http://www.3wheelerworld.com/showthr...k-for-coolpool

  4. #19
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,638
    If you purchased a new piston make sure to check the deck height with the stock piston .
    There is so much crap out there that aren’t designed for the factory OEM cylinder heads combustion chamber .
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

  5. #20
    Join Date
    Jun 2010
    Location
    Cold Lake, Alberta, Canada
    --
    2,954
    Quote Originally Posted by shortline10 View Post
    If you purchased a new piston make sure to check the deck height with the stock piston .
    There is so much crap out there that aren’t designed for the factory OEM cylinder heads combustion chamber .
    I purchased a new 50cc one as my bore checked out OK. Great advice shortline, will do. Thanks! What does ease my mind is the company states to be the largest supplier of mini parts in Canada https://phatmx.com/

    Can you shoot me a text, I lost your contact with the change of company phones.

    Does anyone have a secret stash of OEM exhaust valves for these things?
    Trikes
    1970/71 US 90 (Aquarius Blue)
    1970/71 US 90 (Future Resto Project)
    1972/73 US 90 Camo Project (110 Big Bore)
    1972/73 US 90 Green
    1977 ATC 90 w/83 110 motor (Fugly)
    1982 ATC 70
    1983 ATC 70 (Ladybug)
    1973 ATC 70

    1965 Marketeer 3 Wheel Golf Cart with 1986 Honda 250 drivetrain

    TF 2015

    Feedback http://www.3wheelerworld.com/showthr...ck-for-coopool
    http://www.3wheelerworld.com/showthr...k-for-coolpool

//ArrowChat Integreation Code //