Thanks, i'll go ahead and use it.
New to the board
Arm chair racerNew to the board
Thanks, i'll go ahead and use it.
New to the board
Arm chair racerNew to the board
The kit has the rings, but no info. I have 1 silver ring w/marking and 1 black ring w/marking and the oil rings. I guessing the black is the 2nd ring down and silver on top, w/ markings facing up, is that right?
Power User
The day begins with 3WW
All marked rings face up , silver is your top ring , black is your second ring .
Do a quick google on how to install them correctly and how to position the gaps , it’s very important .
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10
Got The Holeshot
Arm chair racerJust too addicted
Here is a visual
https://youtu.be/KBnmd-v3mLA
mrc_builds on YouTube Channel
https://www.youtube.com/channel/UCmw...confirmation=1
My Addiction
85 200m "Tallahassee"
84 200x "SouthPort"
84 200x "Van Halen"
84 250r "lucky"
85 250sx "Enterprise"
85 350x "The Money Pit"
85 350x Code Red
86 250r "Unicorn"
86 trx250r
88 Lt250r Suzuki
mrc_builds saves trikes like Jimmy Swaggart saved souls back in the day -said Patriot1
New to the board
Arm chair racerNew to the board
No marks, know how to gap
New to the board
Arm chair racerNew to the board
Update, everything went great until i try to put timing chain on, to short. Come to find out the china cylinder is taller than factory cylinder. After wasting lots of time and money i'm having the factory cylinder bored and ordering new piston/rings. Might be a china cylinder out there that will fit, but not this one. Has 7 fins like the factory one. Out
Last edited by haroldpo6; 11-12-2021 at 05:06 PM.
Reply With Quote