//ArrowChat Code
Results 1 to 6 of 6

Thread: Aftermarket exhaust that will fit 84 200M

  1. #1
    BarnBoy is offline Just Too Addicted Arm chair racerJust too addicted
    Join Date
    Jun 2015
    Location
    Oklahoma
    --
    731

    Aftermarket exhaust that will fit 84 200M

    My original plan was to modify a 200X supertrapp to use on my 200M. Well, I'm running out of time and patience. Used to be able to find DG pipes pretty reasonable on eBay, but everywhere i look they're out of stock?? I wonder if they discontinued them?? I believe the part number is DG 04-2107?? Anyone have one or know where to find one, or a nicer option the would fit either a 200E Big Red or 200M??

    Thanks
    Thanks
    1984 HONDA ATC200M - OG, mid-restoration
    1981 HONDA ATC200 - future build
    1981 HONDA ATC185S - parts
    1984 ATC200X - roller, future build
    1984 Honda ATC250r - in a million pieces- ISO grab bar, PM if you have one

    Da velder
    _______________________________________________
    Feedback:
    http://www.3wheelerworld.com/showthr...ck-for-Barnboy

  2. #2
    Join Date
    Apr 2014
    Location
    Edmond, KS
    --
    2,531
    Be careful. With a DG on it, you won't be able to sneak up anybody.

  3. #3
    BarnBoy is offline Just Too Addicted Arm chair racerJust too addicted
    Join Date
    Jun 2015
    Location
    Oklahoma
    --
    731
    Well I know and I don't really want that. But I'm at the point where I just need SOMETHING that will at least flow better than stock. Even if I only use the DG head pipe and modify a supertrapp to fit later, that may work. Just don't have the time to custom build a header and all that.
    1984 HONDA ATC200M - OG, mid-restoration
    1981 HONDA ATC200 - future build
    1981 HONDA ATC185S - parts
    1984 ATC200X - roller, future build
    1984 Honda ATC250r - in a million pieces- ISO grab bar, PM if you have one

    Da velder
    _______________________________________________
    Feedback:
    http://www.3wheelerworld.com/showthr...ck-for-Barnboy

  4. #4
    Join Date
    Jul 2010
    Location
    Arkansas
    --
    2,196
    While not a full system, this may suit the bill.


    https://www.kimpex.com/en-us/product...0-fac785a75ec6

    Really, the stock headpipe is nice because it's double walled which keeps it cooler on the outside. Those thin walled aftermarket exhaust like DG can get pretty warm on the leg in the summer.
    The story of three wheels and a man...

  5. #5
    BarnBoy is offline Just Too Addicted Arm chair racerJust too addicted
    Join Date
    Jun 2015
    Location
    Oklahoma
    --
    731
    Quote Originally Posted by ATC King View Post
    While not a full system, this may suit the bill.


    https://www.kimpex.com/en-us/product...0-fac785a75ec6

    Really, the stock headpipe is nice because it's double walled which keeps it cooler on the outside. Those thin walled aftermarket exhaust like DG can get pretty warm on the leg in the summer.
    Good point, however they also seem very restrictive to flow. To me anyway, I know too small or large is bad...but I want something I bit bigger than stock. May need a heat shield or wrap though. Not super excited about a wrap but may need to do it.
    1984 HONDA ATC200M - OG, mid-restoration
    1981 HONDA ATC200 - future build
    1981 HONDA ATC185S - parts
    1984 ATC200X - roller, future build
    1984 Honda ATC250r - in a million pieces- ISO grab bar, PM if you have one

    Da velder
    _______________________________________________
    Feedback:
    http://www.3wheelerworld.com/showthr...ck-for-Barnboy

  6. #6
    BarnBoy is offline Just Too Addicted Arm chair racerJust too addicted
    Join Date
    Jun 2015
    Location
    Oklahoma
    --
    731
    Update: found a header I didn't know I had, turns out with a lot less cutting and welding I could make it fit almost perfect on the 200M.

    Click image for larger version. 

Name:	Screenshot_20211202-161155_Gallery.jpg 
Views:	7 
Size:	1.35 MB 
ID:	268652

    Click image for larger version. 

Name:	Screenshot_20211202-161159_Gallery.jpg 
Views:	7 
Size:	1.31 MB 
ID:	268653

    Click image for larger version. 

Name:	Screenshot_20211202-161213_Gallery.jpg 
Views:	8 
Size:	1.41 MB 
ID:	268654

    Click image for larger version. 

Name:	Screenshot_20211202-161224_Gallery.jpg 
Views:	7 
Size:	1.42 MB 
ID:	268655

    Click image for larger version. 

Name:	Screenshot_20211202-161230_Gallery.jpg 
Views:	6 
Size:	1.36 MB 
ID:	268656
    1984 HONDA ATC200M - OG, mid-restoration
    1981 HONDA ATC200 - future build
    1981 HONDA ATC185S - parts
    1984 ATC200X - roller, future build
    1984 Honda ATC250r - in a million pieces- ISO grab bar, PM if you have one

    Da velder
    _______________________________________________
    Feedback:
    http://www.3wheelerworld.com/showthr...ck-for-Barnboy

//ArrowChat Integreation Code //