Reply With QuoteWTF???? IS THERE A SIZE LIMIT ON ATTACHED PICTS? tried a few none work.
weee weeee weeeeeeeeeee ! ! !
The day begins with 3WW
this is the place to start a new build, to much gets lost on the pages! so lets have a little fun again, its been a while since i have used the fourms so be kind. i now have grandsons so we are building a suspension 70 for him. since the world has changed a great deal in the last 10 years this might take a little longer, not sure about picture attaching either . i like big pictures so i will try to figure it out . first off no idea on color yet as i am not picking it out. so lets see what we can do about pictures first.
weee weeee weeeeeeeeeee ! ! !
The day begins with 3WW
WTF???? IS THERE A SIZE LIMIT ON ATTACHED PICTS? tried a few none work.
Power User
The day begins with 3WW
Not sure either , I haven’t been able to post any pictures for months now .
Congrats on the grand kids !
Are you starting from scratch or do you have an A+ frame ?
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10
weee weeee weeeeeeeeeee ! ! !
The day begins with 3WW
i have an A+ frame wow it let me load it.Originally Posted by shortline10
weee weeee weeeeeeeeeee ! ! !
The day begins with 3WW
here is how far from basic i am starting,,,,, can you figure out what this is going to be?
weee weeee weeeeeeeeeee ! ! !
The day begins with 3WW
ok i think i figured this out.... here is where i am starting on the motor. boring the cases to do a big bore non stroker,
Power User
Catch me if you can
Prettier???here is how far from basic i am starting,,,,, can you figure out what this is going to be?
It sucks to get old
weee weeee weeeeeeeeeee ! ! !
The day begins with 3WW
the frame i am starting with is in real bad shape. i started by cutting off all the brackets and had them all remade. probably why this is going to take a little longer, want everything just right, i made a few sets so i have spares just in case.
weee weeee weeeeeeeeeee ! ! !
The day begins with 3WW
lol you got that right!!!!
weee weeee weeeeeeeeeee ! ! !
The day begins with 3WW
start with the bottom mounts, once positioned proper i will do the top ones too a lot of this work is already done so i am searching for picts from a moth or 2 ago so you can see what it takes to bring one back. also sent a ton of stuff out to replate , like clean hardware to make a big difference in detail and its all honda OEM too.
weee weeee weeeeeeeeeee ! ! !
The day begins with 3WW
over the years i have not stopped building, i have just got caught up in the rush and have not taken the time to share builds like i use to, here are a few of them,
Last edited by KASEY; 11-25-2021 at 02:32 PM.
weee weeee weeeeeeeeeee ! ! !
The day begins with 3WW
ok so here is that ugly plate i started with, i found a set of junior dragster rear hubs s\from lonestar, so i needed a matching front hub, i turned it out to the proper size to match the 5 lug wheels, turned a stock hub flange off and mounted the new flange on it, i cut it out out and drilled it to match, since i dont have a color combo yet i am sure they will get painted some color.
Last edited by KASEY; 11-26-2021 at 12:11 AM.
weee weeee weeeeeeeeeee ! ! !
The day begins with 3WW
since this is for the kids....... its true. i had no need to beef up the clutch or the transmission so i am using a stock bottom end. went with an 85 so they get use to up shifting , i bought a 54 mm piston kit from dratv and a short cylinder from tbolt. nobody makes a kit . so it will be a short stroke 95 cc motor. it will rev quick and low end grunt, i am using a newer late model xr70 head since the cam runs on bearings not in the aluminum, got a little more than stock lift but not much. all i had to do is clearance the oil pump shaft and bore the cases , the motor looks stock except the cylinder is aluminum , going to build the manifold so i can keep a 20mm carb under the tank like stock too.
Power User
Got the holeshot
I love watching your builds Richard, thanks for sharing
Looking for a Bassani silencer for a 2nd gen tecate, the style with the movable mount. 1st gen will work
weee weeee weeeeeeeeeee ! ! !
The day begins with 3WW
had a little time to kill so i decided to do away with the crush drive and go solid,, besides i couldn't get the sprocket size i was looking for , so here it is. old and new.
