Just Too Addicted
Arm chair racerJust too addicted
I was tearing into my pump housing to replace the seals and gaskets to find I need to get a shaft and impeller. I was unable to find those oem yet, so before I order up parts, I was looking for some input.
What brands or part combinations have yall found to be the better options to choose from? Is there a preferred set of parts you would chose?
Thanks in advance.
Sent from my SM-G970U using Tapatalk
Power User
The day begins with 3WW
OEM is always best for the seals and still available .
You can call BDT or ESR and ask about the shaft & impeller
Read up on how to replace the mechanical seal , you get one shot at it . I always use a little heat to press it in .
Partzilla has the seals and gaskets in stock
I would pull the shaft , it might clean up .
https://www.partzilla.com/catalog/ho...50r/water-pump
BDT shaft and impeller kit
https://www.ebay.com/itm/39312753125...sAAOSwurxf9303
Last edited by shortline10; 12-08-2021 at 08:34 PM.
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10
Just Too Addicted
Arm chair racerJust too addicted
Right on thanks.
As mentioned. I do have gaskets and seals. But I did not want to jump on a bdt or esr or maybe even a different manufacturer till hopefully I heard some positive or negative reviews on the parts.
Sent from my SM-G970U using Tapatalk
Reply With Quote