Hey guys, I’m helping my brother fix up his 85’ Honda 250r. One of the transmission bearings is sticky/rough feeling. It’s behind the second gear stack, or right side gear stack. Where can I find the replacement? Thanks
Hey guys, I’m helping my brother fix up his 85’ Honda 250r. One of the transmission bearings is sticky/rough feeling. It’s behind the second gear stack, or right side gear stack. Where can I find the replacement? Thanks
THE 80's RAGE! Currently owns:
81, 85 Yamaha Tri Moto 125
83 Yamaha Tri Moto 200 x2
82,83 Yamaha Tri Moto 175 project
85 Yamaha Tri Z 250
84 Kawasaki Tecate 250
84 Honda ATC 70
85 Honda ATC 350X
84 Honda ATC 250R
(2) 84 Honda ATC 200x
82, 83 Honda ATC 185s
81 ATC 200
Lots of other parts and bikes
mcmaster carr or bearing shop. bearings have part numbers on them look up buy end of story
Did you check OEM looking through the microfiche? I have used www.powersportsdiscount.com but there are plenty of places out there for oem parts. Many of the bearings are still available. If not, measure it accurately in milimeters and look for a replacement from a bearing company
Measure it and then search for that size, you'll often find other options.
Be aware that Honda loved to change things up and there are a few bearings and seals that do not cross to anything. Honda would change a standard 20mm ID to 22 mm ID or similar.
Such as the 350X left crank and countershaft bearing, both are odd sizes and unavailable from any aftermarket source, they are both custom bearings...
All our government does is distract us while they steal from us, misspend our tax $ and ruin our country