//ArrowChat Code
Results 1 to 4 of 4

Thread: Big Red 250 loud ticking from top end...still

  1. #1
    Join Date
    Feb 2011
    Location
    Pierre Part, Louisiana
    --
    6

    Big Red 250 loud ticking from top end...still

    I noticed a really loud ticking and had some maintenance in the crankcase anyway so i decided to pull the headcover and side off to replace one way bearing, new clutch, and new timing chain. Got everything back together after replacing the original loose chain, verified my tensioner was working, and adjusted the valves how the manual states. And STILL have a very noticeable tick sound from right at the top of the motor.

    Chain was nice and snug, no noticeable wear inside the head cover except for a very slight scaring under one rocker arm that my finger nail couldnt feel so i figured it was good to run. Should I try to adjust valves slightly tighter than .003? bad valves and rockers? bad cam? what do you guys think? still has good compression and runs/idles great.

  2. #2
    Russell 350X's Avatar
    Russell 350X is offline Testicles between my toes at the devils backbone Teaching quads a lesson
    Join Date
    Mar 2003
    Location
    Steamburg/Randolph NY
    --
    3,092
    Adjust to .002.
    TF 07,08,09,10,11,12,13,14!
    Raffa's IceFest 08, 09, 10,11,13!

    SAY IT!!!!!BUD LIGHTS AND RED LIGHTS!!!!!!

  3. #3
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,726
    Tensioner probably isn’t holding while running .
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

  4. #4
    Join Date
    Feb 2011
    Location
    Pierre Part, Louisiana
    --
    6
    Just put the motor to TDC and noticed both rockers had crazy amount of slack. Reset to .002 and fired up smooth quiet like a brand new engine. Now im wondering if i had the correct TDC stroke the first time..oh well all good now probably for another 30+ years

//ArrowChat Integreation Code //