Hello all, I'm rebuilding a 1983 YTM200K. I bought this trike for the seat pan and the plastics for my YTM200ER. The engine was there but the head bolts were gone so I took it apart and everything looked fine. The head exhaust mounting holes were trashed so I found a 225DX junker with a good head and other good parts. I honed the cylinder and put a new set of rings and the 225 head on it and it runs great, clutch is good and has all 5 gears. I moved on to check and see if the lighting coil still worked, this is where I may have messed up. I took the 225 tail light and put it on the 200K not realizing it uses a different bulb. The light worked though was very bright, when I revved up the throttle it got really bright then quit. Could the wrong bulb have fried my lighting coil?
Thanks