//ArrowChat Code
Results 1 to 5 of 5

Thread: anyone know the atc 250r 85-86 triple clamp rake angle?

  1. #1
    Join Date
    Mar 2022
    Location
    wisconsin
    --
    1

    anyone know the atc 250r 85-86 triple clamp rake angle?

    im mocking one up for a project but just need to know the built in rake angle the triple clamps have. please help if you know. thank you

  2. #2
    Join Date
    Apr 2011
    Location
    Mexico
    --
    9,003
    It sucks to get old

  3. #3
    Join Date
    Jan 2018
    Location
    California
    --
    103
    Below is a factory manual that has the spec on page 1-3, however, for some reason, I think they may also have staggered tripple trees, meaning the offset of the top one is different than the offset of the bottom one. Someone here may know for certain.

    http://www.oscarmayer.net/atc/manual...vicemanual.pdf

  4. #4
    Join Date
    Apr 2011
    Location
    Mexico
    --
    9,003
    You can pass this on to your friend Mike.

    Click image for larger version. 

Name:	C5952819-F3E4-4ACA-811D-6647BC73998A.jpeg 
Views:	10 
Size:	710.3 KB 
ID:	269612
    It sucks to get old

  5. #5
    Join Date
    Jan 2018
    Location
    California
    --
    103
    Ok, apparantly I can't read anymore, lol. I thought you were asking about the angle of the steering head which you clearly were not.

    The offset (stagger) in the tripple trees is 6 degrees according to Jason Halls post that elcamexican posted.

    There is a ton of info in the thread elcamexican posted.
    ,
    Last edited by rpeters; 06-25-2022 at 12:21 PM.

//ArrowChat Integreation Code //