//ArrowChat Code
Results 1 to 3 of 3

Thread: New member here!

  1. #1
    Join Date
    Jul 2022
    Location
    Manahawkin, NJ
    --
    1

    New member here!

    Hey everyone,

    New member here. I found this page because I bought a three wheeler on fb market place and Iím in need of some info and parts.

    The atc I purchased Iím told is a 1983 200. Itís tough to pull start, runs well once itís warmed up, and has no brakes at the moment.

    Thanks for having me!

    Ian

  2. #2
    Join Date
    Apr 2014
    Location
    Edmond, KS
    --
    2,510
    What info and parts are you looking for? A 1983 ATC200 is the only year that the plain 200 had front suspension. The stock tire size was 25x12-9. The rear fenders were separate, not one piece. It was pull start only. Any thing else and it's not a 1983 ATC200. It's best that you buy OEM Honda brake shoes if you can. Most of the aftermarket shoes don't last very long. EBC is supposed to be a good brand of brakes for cars. I put new EBC shoes on the front and back of a 1985 ATC250SX once. I rode it for about 20 minutes at the most, by the time I got back, I had no rear brakes and just enough front brakes to stop slowly. I had taken all of the adjustment out of the cables during that ride. I'll never make that mistake again!

  3. #3
    Join Date
    Jul 2012
    Location
    Central Mississippi
    --
    14
    Welcome aboard!

//ArrowChat Integreation Code //