//ArrowChat Code
Results 1 to 9 of 9

Thread: 1984 atc 200x ?

  1. #1
    Join Date
    Aug 2020
    Location
    florida
    --
    58

    1984 atc 200x ?

    I'm looking at a 84 200x that the seller says lost all gears, but still runs good. What all could this be?. I have rebuilt several 200, 200es before, but nothing with a clutch, or kick start.

  2. #2
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,722
    Possibly burnt up clutch or stripped out sprocket shaft .
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

  3. #3
    Join Date
    Aug 2020
    Location
    florida
    --
    58
    Thanks, he said 3rd gear was acting up and his kid was riding shifting from 2nd to 4th and then nothing. I'll tear into when it cools off some in nw florida.

  4. #4
    Footy's Avatar
    Footy is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Feb 2015
    Location
    Charlotte, N.C.
    --
    294
    Sounds like a bad shifting fork. Possibly a broken gear as well.
    Put your butt on the inside fender or end up on the ground!

    TRX450ER
    ATC250SX
    ATC350X
    ATC110
    ATC185S
    XR100R
    CRF230F
    Raptor 125
    Breeze 125
    Grizzly700

  5. #5
    Join Date
    Aug 2020
    Location
    florida
    --
    58
    I starting to order parts i know i will need when i tear the engine down and would like to know what complete gasket set is everybody using right now. I'll wait on the bearings until i get into it. I've used vesrah sets on 200es, 200, etc without leaks before, but is been a while.
    Last edited by haroldpo6; 08-01-2022 at 10:07 AM.

  6. #6
    Join Date
    Jul 2005
    Location
    Manheim, PA
    --
    5,741
    200X gears were weak, it needs a full rebuild. kicker gears always sucked on them. They need back cut a machined shim added and a new kicker spring. I have done many. I will not another one. Bad design, tired 40 year old motors...No thanks. A different motor is better swap like CRF230...

  7. #7
    Join Date
    Nov 2019
    Location
    Florida
    --
    1,044
    Is it located in Blountstown Florida?
    I just looked at one with the same description, real interesting seller too.
    I rode it 2 months ago, it needs everything, it was slipping bad then and smoking a carton.
    He wanted 3k and said he had the title, lol the title didnt match the trike. He also said he had a leather tank cover, But I never saw it.
    I have a 200x and a few others if your looking to buy a trike. PM me if your interested.

    MrC
    Last edited by MrConcdid; 08-01-2022 at 03:52 PM.
    mrc_builds on YouTube Channel

    https://www.youtube.com/channel/UCmw...confirmation=1


    My Addiction
    85 200m "Tallahassee"
    84 200x "SouthPort"
    84 200x "Van Halen"
    84 250r "lucky"
    85 250sx "Enterprise"
    85 350x "The Money Pit"
    85 350x Code Red
    86 250r "Unicorn"
    86 trx250r
    88 Lt250r Suzuki

    mrc_builds saves trikes like Jimmy Swaggart saved souls back in the day -said Patriot1

  8. #8
    Join Date
    Aug 2020
    Location
    florida
    --
    58
    Sounds like the same one, he's dropped the price way down.
    PM sent
    Last edited by haroldpo6; 08-01-2022 at 10:50 PM.

  9. #9
    Join Date
    Aug 2020
    Location
    florida
    --
    58
    Update, Top (R) shift fork broke in half, reason why it whould not shift, 3rd gear chewed up. This engine has been thru alot. I found all the parts to fix it on fleabay

//ArrowChat Integreation Code //