//ArrowChat Code
Results 1 to 8 of 8

Thread: BAPP brake mount

  1. #1
    Join Date
    Feb 2008
    Location
    somerset uk
    --
    41

    BAPP brake mount

    As the title says I am after some information on the brake bracket that came with the Bapp rough and ready forks, mine is missing along with the fender mounting hardware, if anyone has and good pictures of what it looks like that would be great, I have no idea what it should look like , then maybe I could replicate it. Any help would be appreciated Mark.


    Sent from my iPhone using Tapatalk

  2. #2
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,579
    If you look at my full suspension 185s build I have the brake bracket , the fender brackets I never use because it put the fender low on the fork tubes and looks off , I always installed them to the underside of the lower triple clamp with a few 1/2Ē spacers .
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

  3. #3
    Join Date
    Feb 2008
    Location
    somerset uk
    --
    41
    Thanks Mike, It looks quite a simple design, should be fairly simple to replicate. I see you didnít use it on your build in the end, what prompted that decision? What bracket was it?

    Mark


    Sent from my iPhone using Tapatalk

  4. #4
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,579
    I don’t remember lol , I had a bunch of kits back then and I believe the bracket I ended up with was just a cleaner design, it also holds the drum a little better I believe .
    I still have a box full of triples and brackets , I might have what your looking for .
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

  5. #5
    Join Date
    Feb 2008
    Location
    somerset uk
    --
    41
    Quote Originally Posted by shortline10 View Post
    I donít remember lol , I had a bunch of kits back then and I believe the bracket I ended up with was just a cleaner design, it also holds the drum a little better I believe .
    I still have a box full of triples and brackets , I might have what your looking for .
    PM sent


    Sent from my iPhone using Tapatalk

  6. #6
    Join Date
    Feb 2008
    Location
    somerset uk
    --
    41
    Quote Originally Posted by shortline10 View Post
    I donít remember lol , I had a bunch of kits back then and I believe the bracket I ended up with was just a cleaner design, it also holds the drum a little better I believe .
    I still have a box full of triples and brackets , I might have what your looking for .
    That would be awesome anything you could do to help regards mark


    Sent from my iPhone using Tapatalk

  7. #7
    Join Date
    Jan 2018
    Location
    Metro Detroit, Michigan USA
    --
    76
    It does not appear that this 1984 BAPP catalog I have has the views you're after, but it has some neat information nonetheless.

    https://drive.google.com/file/d/17Dq...ew?usp=sharing

  8. #8
    Join Date
    Feb 2008
    Location
    somerset uk
    --
    41
    Thanks Jack it still a cool read


    Sent from my iPhone using Tapatalk

//ArrowChat Integreation Code //