//ArrowChat Code
Results 1 to 5 of 5

Thread: RD350 on a Tri-z

  1. #1
    Join Date
    May 2008
    Location
    Tenn
    --
    548

    RD350 on a Tri-z

    Has anyone ever mounted an RD350
    on a Tri-Z with any success?
    If so, what issues did you face?
    such as the exhaust system and mounts.
    I have seen posts about the 490 but that’s about it.
    Thanks
    Just-Tri-It

    :Trikes Owned:
    1985 Tri-z's 3
    1986 Tri-z
    1984 YTM 200ERN 1

  2. #2
    Join Date
    Oct 2011
    Location
    SLC, UT
    --
    88
    I haven't seen an rd350, but this is a banshee engine build:
    http://www.3wheelerworld.com/showthr...ad-A-K-A-Trish

    BVC is building a yz250 based trike with a banshee engine right now.
    https://www.youtube.com/watch?v=FN3StJtUhPU&t=13s

    Neither are Tri-z frames, but you can look at the frame and decide what needs to happen for the tri-z.

  3. #3
    Join Date
    Jan 2007
    Location
    Oceanside, CA
    --
    88
    With a cutoff wheel, a grinder and a mig welder, just about anything is possible.

  4. #4
    Join Date
    Jan 2009
    Location
    ohio
    --
    1,750
    I second that and someone to hold your beer while you make the first cut
    If its on the internet its got to be true they can't put any lie's on the internet

  5. #5
    Join Date
    Mar 2010
    Location
    Arizona
    --
    844
    BVC Trikes is in the process of building one--see youtube. It involves quite a bit of cutting and welding, e.g., the frame, pipes, etc.

//ArrowChat Integreation Code //