//ArrowChat Code
Results 1 to 2 of 2

Thread: New member, project trike

  1. #1
    Join Date
    Sep 2022
    Location
    Indiana
    --
    1

    New member, project trike

    I picked up this bike about a year ago as a side project for cheap. Sat for 15 years and was rough but I like bringing things back to life and have always wanted a 3 wheeler so I decided to give it a go.
    The plastics were badly pitted and the motor had low compression. Could not save the carb and had no spark. After a top end and rewiring the bike to use a DC cdi it is now running. It's running a pz30 carb because I had one on hand. The handlebar switch was bad, replaced it with one I had from something in the past. 2 new tires as the ones it had were the wrong size. Fork seals and other routine maintenance finished now and there are a few little things to do but otherwise it's as complete as it's going to be.

    Click image for larger version. 

Name:	20220930-163159.jpg 
Views:	27 
Size:	16.7 KB 
ID:	269894

    I plan to put a lot of hours on this next year, perhaps get into a tri-z if the right one shows up.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	20210905-201412.jpg 
Views:	19 
Size:	16.6 KB 
ID:	269895   Click image for larger version. 

Name:	20210905-201412.jpg 
Views:	20 
Size:	106.4 KB 
ID:	269896  

  2. #2
    Join Date
    Apr 2014
    Location
    Edmond, KS
    --
    2,531
    Not too shabby.

//ArrowChat Integreation Code //