Ok I'msitting for 15+years from my neighbor just about everything was trash on it I had a layer of sludge in the cylinder so I bought a new 223cc cylinder and piston kit it's got 140psi dry no gas I bought a new carb because the insides were dust and unsalvageable I got new ignition coil and got a used stator/exciter that supposed to work It has 206 ohms instead of 245 but I've got a fat blue spark but when I turn it over with a drill(I get tired of pulling starting it) I get nothing if I put my hand over the carb I can get it to back fire every now and then I feel like everything is there I'm sure it in time I've checked it 3 times but still just won't start it seems like gas isn't making it to the cylinder I lapped my valves because one was bent a little but it's sealing great now but the valve were so I tight I backed them off any help would be appreciated new here but I got a 82 185s that has been