//ArrowChat Code
Results 1 to 6 of 6

Thread: Which carb for 350X?

  1. #1
    Footy's Avatar
    Footy is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Feb 2015
    Location
    Charlotte, N.C.
    --
    296

    Which carb for 350X?

    I am finally getting a chance to go through my 350X and correct a few things. The carb needs a rebuild but I thought about getting the 400ex carb instead. I was wondering what is the general consensus on the 400ex carb vs. rebuilding the stock 350X carb? I realize the price difference. My 350X is a rider not a collection piece. I am just trying to make it into a better rider. Thanks in advance for any advice.
    Put your butt on the inside fender or end up on the ground!

    TRX450ER
    ATC250SX
    ATC350X
    ATC110
    ATC185S
    XR100R
    CRF230F
    Raptor 125
    Breeze 125
    Grizzly700

  2. #2
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,722
    If your factory carburetor is in good condition for sure rebuild it . The only kit I would recommend is a shindy or OEM .
    Their are a ton of threads on this site on the positives of going with a new OEM 400ex or 400x carburetor .
    Here is one
    http://www.3wheelerworld.com/showthr...0ex+carburetor
    Last edited by shortline10; 11-11-2022 at 05:31 PM.
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

  3. #3
    Join Date
    Nov 2019
    Location
    Florida
    --
    1,044
    A real OE Honda 400ex carb it perfect. this is also a great way to take advantage of other up grades IE: exhaust, over bore, raised compression, fancy air filter.
    mrc_builds on YouTube Channel

    https://www.youtube.com/channel/UCmw...confirmation=1


    My Addiction
    85 200m "Tallahassee"
    84 200x "SouthPort"
    84 200x "Van Halen"
    84 250r "lucky"
    85 250sx "Enterprise"
    85 350x "The Money Pit"
    85 350x Code Red
    86 250r "Unicorn"
    86 trx250r
    88 Lt250r Suzuki

    mrc_builds saves trikes like Jimmy Swaggart saved souls back in the day -said Patriot1

  4. #4
    Join Date
    Jul 2005
    Location
    Manheim, PA
    --
    5,742
    BUY a new last year 400ex carb. drill out the welch plug to access the AF screw and jet it up. $250 for a new OEM carb. Screw the used 20 year old ones. I put one on my 300x....sucker moves!

  5. #5
    Join Date
    Dec 2022
    Location
    new york
    --
    1
    I got an amazon 400ex carb for $40 with a throttle cable. It took some patience with a heat gun to get it together, 30 minutes of jetting and its a night and day difference, way more top end.

  6. #6
    Join Date
    Jul 2005
    Location
    Manheim, PA
    --
    5,742
    I'd use an OEM 400ex carb which you can get a new 2014 still from honda.

//ArrowChat Integreation Code //