Reply With QuoteI have a scanner and several printers. If someone sent me one I could scan it and make copies.
First Time Rider
Arm chair racerNew to the board
It seems like every 250r I find it’s always missing the air box cover or they put 20 holes in the cover and if you wanna get one they cost ya an arm and a leg. I don’t have the money or time but somebody needs to 3d print these covers they probably make some good money.
83 Honda 250r
85 Honda 70
83 Honda 185s
85 Yamaha Tri-Z (restoring)
83 Honda 70
79 Honda 70
74 Honda Z50
78 Harley Davidson Golf Cart w/Big Red Engine!!!
New to the board
Arm chair racerNew to the board
I have a scanner and several printers. If someone sent me one I could scan it and make copies.
At The Back Of The Pack
Arm chair racerFirst time rider
A few months back i saw 3D printed air box lids on Ebay for a 350X. I never looked for the 250R.
Put your butt on the inside fender or end up on the ground!
TRX450ER
ATC250SX
ATC350X
ATC110
ATC185S
XR100R
CRF230F
Raptor 125
Breeze 125
Grizzly700
First Time Rider
Arm chair racerNew to the board
I'm currently doing a pretty extensive rebuild of my friend's 85 R and was surprised to see his airbox lid, fully intact, still on the bike. There are 2 small holes (less than 1/4") in it near the front and a small spot where something rubbed against it for a while. But it's otherwise functionally OEM. I told him that if he wanted to have a little extra cash to go towards his rebuild that he should sell it.
Maybe someone should get a hold of a good condition one and go through the process of reproducing some through injection molding. there's definitely enough of a market to make the investment worthwhile in my opinion.
First Time Rider
Arm chair racerNew to the board
I have bought a few items from the ebay seller: printiful_3d . He is from Canada. He's doing some nice 3-D printing of big red parts - fender guards and such. He's responsive to messages if anyone wanted to reach out.
3 Wheels:
1982 Honda ATC 185s
1983 Honda ATC 250R
1984 Yamaha 225DX
1985 Honda 250SX
1985 Honda Big Red 250ES
1986 Honda Big Red 250ES
4 Wheels:
1987 Honda TRX 250 Fourtrax
2017 Honda Rancher
Power User
Got the holeshot
I was surprised to see a unmolested airbox and lid on my latest 85 250r. I was actually surprised at how unmolested the whole trike was. jim
81 185s
82 185s with 85 200s motor
suspended 185s
85 atc70
1984 200s
85 350x 3rd owner
and a 72 ct70
projects coming along
85 200s
81 suspended 185s (can't believe I came across 2)
1982? 185s
Power User
Got the holeshot
I can say that the guy who runs printful_3D is a big name in the Facebook crowds and has a good reputation. He does a lot of different products. I have a pair of 250ES tail light gaskets on order from him.
New to the board
Arm chair racerNew to the board
Something to be careful with is copyrights, I believe someone on ebay was 3D printing preproduction honda parts, he was approached by Honda and forced to stop, am I remembering this correctly?
Got The Holeshot
Arm chair racerJust too addicted
I can get you in touch with someone that probably has one if your on Facebook, PM me and I will give you his contact info.
mrc_builds on YouTube Channel
https://www.youtube.com/channel/UCmw...confirmation=1
My Addiction
85 200m "Tallahassee"
84 200x "SouthPort"
84 200x "Van Halen"
84 250r
85 200x "Panama"
85 250sx "Enterprise"
85 250es Big Red "Crawford"
85 350x "The Money Pit"
85 350x Code Red
86 250r "Unicorn"
88 Lt250r Suzuki
mrc_builds saves trikes like Jimmy Swaggart saved souls back in the day -said Patriot1
New to the board
Arm chair racerNew to the board
BTW MrC Just saw your last video (84 250R)and absolutely loved it. I had one (83) that was hellbent on killing me when I was a kid.
