//ArrowChat Code
Results 1 to 4 of 4

Thread: cylinder valve cover

  1. #1
    Join Date
    May 2022
    Location
    Three Lakes, WI
    --
    5

    cylinder valve cover

    Hello
    Is a gasket required for the cylinder head valve cover on a 1985 Honda ATC200S? if so a possible part number or where I might find one or do you use a liquid gasket.

    Thanks in advance for any help

  2. #2
    Join Date
    Apr 2006
    Location
    London Ontario, Canada
    --
    1,192
    Good morning, there is no gasket for the head cap, put a thin layer of liquid gasket on the mating surface, torque to spec., wipe off excess. Take care that you don't get any in the cam journals or the black rubber stopper on the head.
    R.I.P. Sandpuppie, you are greatly missed!
    May you rest in peace Jeswinehart, deeply missed, never forgotten....
    Feedback thread http://www.3wheelerworld.com/showthr...ight=tapper190

  3. #3
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,722
    Also the most important process is to have clean mating surfaces .
    I use Honda bond HT which is the OEM sealant .
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

  4. #4
    Join Date
    May 2022
    Location
    Three Lakes, WI
    --
    5
    Got it. Thanks much

//ArrowChat Integreation Code //