I rebuilt the petcock on my 250r with a ebay kit. now I'm looking for a kit for my 350x and can't seem to find a kit on ebay or rocky mountain atv etc. Is there a kit available? or does the ebay petcocks flow enough for a 350x? thanks. jim
Power User
Got the holeshot
I rebuilt the petcock on my 250r with a ebay kit. now I'm looking for a kit for my 350x and can't seem to find a kit on ebay or rocky mountain atv etc. Is there a kit available? or does the ebay petcocks flow enough for a 350x? thanks. jim
81 185s
82 185s with 85 200s motor
82 185s
and a 72 ct70
Registered User
New to the board
You can still purchase the screen and all O-rings from Honda, as long as you have the factory petcock. Its cheaper to buy a Chinese petcock off eBay but not the same quality as Honda. I purchased 2 different ones off eBay only to have them both leak. Buy the parts from Honda!
Power User
Roostin Away
Some where on here I found that someone was using parts from a R I think to rebuild a 350x. I’m pretty sure that’s what I did to rebuild a oem one. The aftermarket ones are never the same and most have smaller hose nipples on them
If its on the internet its got to be true they can't put any lie's on the internet
Power User
Roostin Away
http://www.3wheelerworld.com/showthr...d-Step-By-Step
Here’s a link
Reply With Quote