went out and ran a ground wire from the motor to the frame where the harness grounds to. no spark, tried all 3 coils nothing. pulled the plug boot and no spark.
so the 2 cdis I have I put a probe on the pin that gets the black/red wire from the stator. 6 pins double connector on the right the black red connects to the bottom right touch the probe to the middle bottom where the green goes and get 472 then 472 going to the bottom left green white wire.
top row nothing on the left or middle
blue then black yellow. then the top right black white the meter goes to 001 this is all with the meter on continuity
and this is the new cdi
the cdi that came with the trike
bottom right touch middle then left both reads 004
top row left middle nothing top right 001 so these 2 cdi aren't the same. jim
81 185s
82 185s with 85 200s motor
suspended 185s
85 atc70
1984 200s
85 350x 3rd owner
and a 72 ct70
projects coming along
85 200s
81 suspended 185s (can't believe I came across 2)
1982? 185s