350x cdi? and other 350x questions.
I'm going to just post all my new 350x getting it running questions here.
This 85 350x lost spark according to the previous owner.
the stator reads 80ohm. depending on which stator it's either good or bad. let's go with good.
The CDI looks brand new but new from where?
I went to the manual, it says you need a special tester but went with the chart on checking pin to pin and where it's supposed to get resistance or a reading, there's nothing.
So the question is, has anyone tested a factory cdi to what's in the manual with a multi meter and come close to what's in the book?
pulse generator. I'm sure I'm setting the multimeter wrong, ive got 2 motors
on the 200ohm setting 1 reads 15.7
the other reads 1.2
Anyone try the ebay cdi for a 350x? or maybe tje coil, cdi and plug kit? I'm just wanting to get spark off tje machine.
I did check the wires from the motor to cdi to coil
I unhooked the switch, kept the ground on the harness
jim
81 185s
82 185s with 85 200s motor
suspended 185s
85 atc70
1984 200s
85 350x 3rd owner
and a 72 ct70
projects coming along
85 200s
81 suspended 185s (can't believe I came across 2)
1982? 185s