Reply With QuoteLast picture.
Always finding new and exciting ways to not give a hoot in hell
Catch me if you can
Material came in yesterday...got it partly layed out and welded together. I'm gonna put in another brace further in up front tomorrow, and make my seat mounts. And then I'll make the bottom braces and maybe get to weld them in. A few pictures of the progress. My welds aren't perfect but neither are yours
One can only beat their head up against the wall so often before they get blood in their eyes.
Note to members: Stupidity is a BANABLE offense, mods can decide if YOU are being stupid and WILL ban you!
Always finding new and exciting ways to not give a hoot in hell
Catch me if you can
Last picture.
One can only beat their head up against the wall so often before they get blood in their eyes.
Note to members: Stupidity is a BANABLE offense, mods can decide if YOU are being stupid and WILL ban you!
Twinkle Toes
The day begins with 3WW
So a couple of braces and seat mounts and we'll be able to see the almost finished project?
Nate
The Myth, The MAN, The Legend
R.I.P HRR
Originally Posted by honda250sx
Always finding new and exciting ways to not give a hoot in hell
Catch me if you can
Yup...Hopefully be done by this weekend unless I run into a major problem.
One can only beat their head up against the wall so often before they get blood in their eyes.
Note to members: Stupidity is a BANABLE offense, mods can decide if YOU are being stupid and WILL ban you!
Power User
Roostin Away
awsome as usual Billy!!! just keep on making me jelous man...........someday when I get my 500r I'll have to drag race you!!! Till then keep up the good work!!!
"I have but one lamp by which my feet are guided, and that is the lamp of experience." -Patrick Henry
NEW ENGLAND ATC owners please join!:http://www.3wheelerworld.com/group.php?groupid=27
Roostin' Away
Arm chair racerRoostin Away
looking good.
you MIG'n or TIG'n?
1986 350X K&N filter, DG Krome Power exhaust
1982 110 UNI filter, Cobra megaphone exhaust
1982 honda 110 exhaust for sale, PM me.
Always finding new and exciting ways to not give a hoot in hell
Catch me if you can
GTAW (tig
One can only beat their head up against the wall so often before they get blood in their eyes.
Note to members: Stupidity is a BANABLE offense, mods can decide if YOU are being stupid and WILL ban you!
Power User
Roostin Away
dumb question but what is the difference?GTAW (tig
85 250SX New to me!!
85 ATC 70 stock ~ TRADED
85 ATC 70 with 138cc Lifan
83 110 restored ~ sold
85 110 restored ~ sold
83 200x restored ~ sold
02 400ex ~~~SOLD
K&N filter
K&N jet kit
EHS Racing lid
Removed choke 42 pilot DJ146 main
HMF full exhaust
AC skids
Holeshot XCR rears
14t front sprocket
IMS Roll front bumper
Graydon Proline nerfs
Always finding new and exciting ways to not give a hoot in hell
Catch me if you can
MIG is wirefeed. What most everyone on TV is using. Tig is where you have the little torch and you have to manually feed the rod in yourself. This is not to be confused with Oxygen and Accetylene welding, which uses the gas mixture from a cutting torch outfit. That is mostly for steel though, not aluminum. Although you can weld aluminum with an oxygen accetylene setup, it requires some very special welding rods.
One can only beat their head up against the wall so often before they get blood in their eyes.
Note to members: Stupidity is a BANABLE offense, mods can decide if YOU are being stupid and WILL ban you!
Power User
Roostin Away
Hey Billy Those Inside 90s Are Fun With A Tig, Don't You Think? Looks Sweet So Far. How Many Times Have You Contaminated The Tungston? Those Aluminum Migs Are Sweet, But They Spatter Alot & I Always Have Trouble With The Wire Balling Up Inside, On The Rollers. It Takes A Long Time To Get The Tention Rite On The Feed Rollers. If Its To Tight & The Wire Doesn't Burn Instantly The Wire Balls Up. Keep Up The Good Work & Don't Make It Too Light,Cause Your Gunna Make Me Work Too Hard Trying To Keep Up. I'm Gunna Have Trans Gears Worked So I Don't Have To Search For Third & Fourth. No Clutch Just Holder Wide Open & Shift.
Last edited by Jason Hall; 07-06-2005 at 10:24 PM.
Power User
Teaching quads a lesson
HEY! What are those foot pegs from? Did they fit right on there?
2007 YAMAHA YTZ450 went to a great home RIP Sam
Always finding new and exciting ways to not give a hoot in hell
Catch me if you can
Yeah those are a pain in the ass. The one I'm using also has the larger diameter hood which makes it really hard to get into the nooks and crannies. I probably should change that tungsten too...I've welded steel and stuff with the same ones
One can only beat their head up against the wall so often before they get blood in their eyes.
Note to members: Stupidity is a BANABLE offense, mods can decide if YOU are being stupid and WILL ban you!
Always finding new and exciting ways to not give a hoot in hell
Catch me if you can
Derrick the pegs are either 200x or 350X ones removed from the mounting plate and the spring return assembly. Then I just took them and ground a big wide gap on them where they fit over that angled part that the original dirtbike pegs go on. They kind of flop a little bit...I need to shim them up. I can get a picture tomorrow probably if you need me to, so you can see what I mean.
One can only beat their head up against the wall so often before they get blood in their eyes.
Note to members: Stupidity is a BANABLE offense, mods can decide if YOU are being stupid and WILL ban you!
Power User
The day begins with 3WW
dont kid yourself weldin alum with a MIG is a chore in iteself....spatters alot....takes some goofin around around too to get the voltage set right so your not burning through **** ...ect ect....lol
1985 Tri-Z-
Power User
Roostin Away
Yea Man & If Its Not Clean As A Wistle, Won't Weld Worth A Darn. Little Blue Bottle Sounds Sweet. But I Think The Old SRX Snowmobile Motor Is The Cure, Just Trying To Set Clutch Up In The Trike. As Soon As I Can I'll Post Some Pictures.
