Does anyone have a manual or any kind of service info that would cover a '95 Vmax 600? I need to know what the factory settings are for the air screws.
Thanks.
Does anyone have a manual or any kind of service info that would cover a '95 Vmax 600? I need to know what the factory settings are for the air screws.
Thanks.
1985 Yamaha YTM225DX
2014 Yamaha WR450F
2008 Yamaha TW200
1975 Honda CB400F
Start at one turn out and work your way out with plug chops and feel!..simple stuff.
1985 Tri-Z-
Originally Posted by mywifeknowseverything
Straight from the factory owner's manual:
air screw 1 1/8 turns out from the seated position.
also, idle speed is listed as 1550 +/- 100 rpm.
i have a problem wih my 96 vmax ... when i first fire up that beast i have to keep my hand on the throttle and i cant let it idle or else it fowls out plugs like mad.. .i cleaned and set the carbs according to the book... what else could be wrong
dirty air filter, sticking choke or too rich pilot jets if it has them
Thanks. A late thank you, but thanks. I also found it on the clutch guard that was laying in my parts pile.Originally Posted by 700srx
1985 Yamaha YTM225DX
2014 Yamaha WR450F
2008 Yamaha TW200
1975 Honda CB400F
LOL, the thanks isn't late. If I would have seen this new sled forum earlier, I would have posted closer to when you needed the info!.![]()