looking for carb kit for 1983 ytm200

[filipinoredneck]

Does anyone know a good supplier of carb kits. Hyper parts, mr. cycle, and bike bandit only carry oem parts individually. Ive seen it on ebay but cant remember who was selling a carb kit for my 1983 ytm 200. I know its out there but I need help...

[mark38090]

Do a search on ebay, I just got one for my YTM. With shipping it was $32.00

[thefox]

Whatever kit you get make sure to check the set sizes, as far as I know there is not a kit out there specifically for the YTM's, the ebay sellers just assume the YFM one will be the same but the jets are different in some cases. I bought the Timberwolf kit for my 200 (same needle valve) and it is working fine, the part #'s match up between the YTM 200, 225, and YFB 250. I think I was also able to use the throttle stop screw and gaskets. I think I had to reused my old jets; luckily they don't wear out all that fast. The kit is $19.99 from denniskirk where just the needle valve is $33 from Yamaha. One thing to note is the float does not come in the kit but unless it is cracked you shouldn't need to replace it.

[mark38090]

Whatever kit you get make sure to check the set sizes.

Thefox, that's good info, where do I find the jet sizes? I need to check mine cause i just got that kit off of ebay.

[thefox]

I have attached the carb. spec. page from the manual. You can also check the on-line parts diagrams. You can neglect the "have" and "should have" on the scan, that was for my dad's trike.

[Dave_D]

Wow. Bumping a really old thread
But....
I'm trying to find a carb kit for my ytm 200e
Googles not turning up much and nothing on eBay

Anyone link me to a kit. Or what they've done ?

Thanks

[barnett468]

you need a new computer.

google search sing firefox "yamaha 200e carb kit"u

http://www.ebay.com/bhp/yamaha-200-carburetor

http://www.ebay.com/bhp/yamaha-200-carb

http://www.google.com/search?q=YAMAH...ient=firefox-a

[Dave_D]

Thanks tryed all those NONE of them specify ytm
Looking for a ytm kit OR one that someone has used with succes and what parts worked/didn't work
I'm not ordering an arm load of "yamaha 200 carb kits" to generic

Thanks

[barnett468]

ok, wow i see your dilemma, bizarre, shindy only lists YFM also.

[Dave_D]

Anyone else ?

[Dave_D]

Not much action here lol
Cause the thread is so old ? Or just no one knows ?
How close is the yfm 200 carb ?
http://www.ebay.ca/itm/230382652935

[tblumer]

try emailing Sudco

[Dave_D]

try emailing Sudco

Thanks
I have sent an email ill post back with results if anyone ever comes across this thread again as I did lol

Dave

[Dave_D]

I've emailed. My email and response below

From: Chad Thompson <chadt@sudco.com>
Date: February 24, 2014 at 8:54:51 AM PST
To: d_daigneault@shaw.ca
Subject: Re: Mikuni vm22
Reply-To: Chad Thompson <chadt@sudco.com>

Hello Dave,

The only thing I can get would be the bowl gasket. Sudco part number 007-999. $3.47 each. The rest of the parts would be Yamaha dealer items.

Chad Thompson
Sudco International Corporation
2410 South Sequoia Drive
Compton, California 90220
(310)637-8330 x 107 - Phone
(800)998-3529 - Toll Free Order Line
(310)637-8331 - Fax
(800)999-3529 - Toll Free Order Fax
chadt@sudco.com
www.sudco.com
www.facebook.com/sudcointernational

View our Volume 37 Catalog here-
http://www.sudco.com/Catalog37Digital/index.html

On 2/24/2014 7:37 AM, Chad Thompson wrote:
Hi

I'm looking for a carb rebuild kit for my vm22 to be spacific it is off a 83 yamaha ytm200 Not sure if a kit is still avalable. Thought I'd email you guys Need any more details Let me know Thanks Dave Sent from my iPhone


---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com

Still looking for answer to the yfm kit. Obviously probably need to reuse old jets.
But is the rest the same ?

Thanks
Dave

[slashfan7964]

Have you gotten ahold of Yamaha themselves?