//ArrowChat Code
Results 1 to 11 of 11

Thread: I didn't know there was other demented people out there!

  1. #1
    Join Date
    May 2007
    Location
    Vista, CA
    --
    53

    I didn't know there was other demented people out there!

    I haven't been on a 3wheeler in 22 years! I switched to quads in 86. About 6 months ago someone gave me a 85 Yamaha 225 shaft 3wheeler. I cleaned the carb and it fired up. After 5 minutes riding, it all came back to me. I was hanging way off the fender in a full lock slide. It was way more FUN then my quads. I needed more!

    I have since bought 6 more 3wheelers, but they even though they are more fun than my quads, they weren't as fast. You see my quads didn't use to be fast enough either, that is until I slammed a CR500 and a XR650 engines into them. This leads me to my plan.

    I want a Honda XR650 3wheeler! The engine is counterbalanced, it has Mega torque, and has way more top speed then the CR500. (I GPS's my quad at 94 mph) After some measurements, I realized that the stock Aluminum motorcycle frame is very close to my 350x. I started planning the conversion. All my quad friends think I am insane. My wife just shakes her head and walks away. I really thought that I was the only person on the planet that would do such a thing! That is until I stumbled upon 3wheelerworld.com

    I just never imagined that all you demented people are out there. I have been reading about all of your conversions and custom creations and I can't get enough. When I get this trike done, I'm gonna drive across the country to Trikefest. I'm glad you are all out there because I'll need some advice and help with my project. I would like to know what anyone thinks about my plan.

    I'm back on 3.
    Attached Thumbnails Attached Thumbnails 650quad.jpg  

  2. #2
    Join Date
    Jan 2003
    Location
    Charles Town, WV
    --
    1,316


    This place is a great resource for info and good people.

    Can't wait to see the progress on your conversion. I guess you'll need to start a thread in the Mad Scientists area to fit in with the rest of the "demented" folks!!

    TrikeFest is a blast. I plan to make it a yearly trip. You think you'll be able to pull off the conversion by June 21st?

    Good luck and keep us posted. I know there are tons of folks that love reading conversion threads.

  3. #3
    Billy Golightly's Avatar
    Billy Golightly is offline Always finding new and exciting ways to not give a hoot in hell Catch me if you can
    Join Date
    Sep 2002
    Location
    Live Oak, FL
    --
    15,066
    Blog Entries
    14
    Welcome fellow brethren of sick and twisted mechanical machines You'll get a long just fine here...Can't wait to see some pictures of that 650 conversion. Lots of talented and knowledgeable people around here, fire away with whatever questions you have!

  4. #4
    Join Date
    Jul 2006
    Location
    United States
    --
    7,765
    WHOOOO HOOOOO!! ANOTHER RETARD TRIKE RIDER!!!! lol arnt those darn thing illegal??? lol!!!! be easy THEY FLIP EASY!!! oh and remember to not do wheelies...why?? becouse it makes the oil go to the back and can cause serious part failure!


  5. #5
    Join Date
    Jan 2006
    Location
    conesus lake NY
    --
    11,894
    Blog Entries
    1


    if ya stick around long enough you'll find out what Means!

  6. #6
    Join Date
    Dec 2004
    Location
    Pa.'s Highest City
    --
    8,058
    Here's a few pics of Randy's 650 Tecate in action. This thing is freakin siiiick!
    Attached Thumbnails Attached Thumbnails paragon pictures 11-11-06 001.jpg   paragon pictures 11-11-06 034.jpg   paragon pictures 11-11-06 067.jpg   paragon pictures 11-11-06 031.jpg   paragon pictures 11-11-06 033.jpg  
    Last edited by chris200x; 05-02-2007 at 10:08 AM.

  7. #7
    Join Date
    Aug 2004
    Location
    Phoenix
    --
    1,226
    Xr650 is a conversion that i've wanted someone to do for a long time!! Are you going to use the alum fram or stuff the motor in the 350x?
    4 Strokes are NOT the wave of the future!

  8. #8
    Join Date
    May 2007
    Location
    Vista, CA
    --
    53
    I plan to leave the engine in the aluminum motorcycle frame as it is as tall as the 350x frame. It also looks to have the same rake on the goose neck. Then I will mate a 2006 TRX450 sub frame to the motorcycle. The 06 sub frame has a battery so I can have an electric start and eliminate the problem of the rearward kick starter. I have a spare molly swing arm from my 650 quad which uses a Elka 400ex linkage. I would have them make a custom shock to reach the motorcycle frame top shock mount. The thing that I haven't figured out yet is the triple clamp setup. It looks like the 350x clamps will hit the stock motorcycle radiators so I may need a custom clamp that is about an inch forward. Does anyone have any experience with this problem? Shooting for 08 TrikeFest

  9. #9
    Join Date
    Jan 2003
    Location
    Belsano, PA
    --
    1,387
    http://www.3wheelerworldforums.com/s...ght=conversion

    Read thru some of that thread. It worked out fairly good, but make sure to get the clamps correct of the steering will NOT work properly. Mine needed changed to be better...heavy steering and not very tight turning radius. Can't wait to see your brute of a trike. Sweet trail machine. SB

  10. #10
    Join Date
    Aug 2005
    Location
    HI
    --
    1,575
    San Diego duner! You hittin up TF then with that then?


    Need to tell the rest of the SD people. MOTOR it out!

    Can't wait to see this project done!
    Rest in peace Rex Carlson

  11. #11
    Join Date
    Feb 2006
    Location
    Texas
    --
    738
    Welcome to the "MENTALLY AND MECHANICALY INSANE" part of 3W.W.

    I think you'll love this. Watch out tho. This sickness is highly contagious!!! lol.

    TORKER.
    THOSE WHO SAY IT CANNOT BE DONE, SHOULD NOT GET IN THE WAY OF THOSE BUSY DOING IT...

//ArrowChat Integreation Code //