project 83 250r

**1upfront** · 08-24-2007, 08:06 PM

Ok I've finally gathered enough parts to put together a daily rider, I'm using my motor from my dragtrike that I ran last season the frame is an 83 I'm using 84 suspension, swing arm and axle. Heres some pics

**200x Basket** · 08-24-2007, 09:33 PM

i have a NOS durablue rear swinger for an 83 or 84 if you decide to really pimp it out.

**1upfront** · 09-10-2007, 07:29 PM

Ok I've picked up a 300r cylinder and head stock bore on ebay for $192 and it's going to be sent out soon to be fitted with a wiseco piston so this project is now a 300r

**84honda200s** · 09-10-2007, 07:40 PM

very nice man !!! it should scream pretty good. ooo yea congrats on the 300R cyl. pick up. ive seen em go for more than that.

**1upfront** · 09-10-2007, 09:03 PM

Here's a pic of the 300r cylinder sitting next to a fl350 cylinder for one of my dragbike projects.
http://i39.photobucket.com/albums/e1...p/100_0088.jpg

**jeffatc250r** · 09-10-2007, 09:24 PM

Cool! Cant wait to see it together!

**Daddio** · 10-21-2007, 04:15 PM

Well fella's I'm not gonna build this bike like I thought I was I'm just gonna put the 300r kit on this

and all the parts I showed are gonna be my 350 dragtrike, I just thought it would be easier this way leaving the 250r together adding only the 300r kit and using the rest of the parts for the 350cc dragster.

**1upfront** · 10-21-2007, 04:17 PM

Ooop's I used my dad's user name again

**JasonB** · 11-02-2007, 12:19 AM

nice looking bike man! looks pretty clean/stock/ready to beat up on!

sorry to revive an old thread, was looking for info on 83R's and this came up

**1upfront** · 01-08-2008, 11:37 PM

I've changed my plans again and decided to put my first season drag motor in it the 300r kit will come later, anyway I put the motor in today and I'll be running last seasons 36mm carb and pro series reeds aswell.
Heres some pic's

New leak free motor in it's new home.

The 350r's frame holding my fragile parts.

And my brand new aftermarket stock looking pipe I even stuck the guard off an old stock one on it.
http://i39.photobucket.com/albums/e1...p/100_0204.jpg

**250rfreak** · 01-09-2008, 12:32 AM

...........................i didnt know you went on this site............................

**1upfront** · 01-13-2008, 08:13 PM

It came to life today with my first season drag motor and some of last seasons goodies as well as a brand new pipe I 'm exited I finally have a rippin trail rider, still needs a little jetting but the motor that was in it when I bought the bike was just a dawg, low compression and leaky. Heres a vid and some pic's.

**tecat-z** · 01-13-2008, 09:30 PM

Man,,,,,, i can't wait til the warm weather comes back!! I love it. Sounds healthy.

**1upfront** · 01-13-2008, 09:58 PM

Thanks alot man this bike is the one I plan on using for mx theres a few more things I have to take care of before it's race ready but It's good to ride until then eventually I will put the airbox back in when I can find the right size boot for the bigger carb and one of the fork legs is slightly tweaked so I'll have to replace it.

**1upfront** · 01-26-2008, 10:17 PM

I got the airbox back in it and used a honda civic rubber intake boot to go from the carb to the airbox. heres a pic.

Thread: project 83 250r

Thread Tools

project 83 250r