Good thing the wife loves me!!! Made a little progress with all my parts In the front room of the house today. Well I machined everything In the garage & brought It Inside to assemble & measure where It's warm . I fitted the swingarm, and also got the rake and wheelbase set. I'll be using stock length Inverted dirt bike forks. It should work out to have 12" of ground clearance when the suspension Is hanging. The seat height will be set at about 29" (same as a stock trx250r). I'm still planning on building an aluminum tank that will be higher than the stock cfr450 tank. That will give me a chance to build a sweet seat up the back of the tank. Now to just get a nice long travel rear shock setup for a trx 450. It turns out I won't have to cut the frame other than removing part of the Origional rear shock mount.