Reply With QuoteLooking good Jason!......
Power User
Roostin Away
Yes I used a 07 TRX swingarm.
83 ATC 60-R Cr60 converted with Zinger parts.
83 ATC 70.
83 Tri zinger
ATC 85-R Cr85 engine on shortened 86-R frame.
ATC450AF
86 310-R Drag racer
440 snowmobile powered custom built.
87 Cr 500 Converted to Drag racer
Sickest custom 450R ever.
Arm chair racerJust too addicted
Looking good Jason!......
1986 ATC 70
1985 ATC 250R - Hondaline Special
1985 ATC 250R - Flat Track 'Privateer'
1985 ATC 250R - HRC 450RR.
1986 ATC 250R - HRC Flat Track.
1998 Honda Laegers TRX 250R (CT 350 PV) N/F cr500 link.
1998 Honda Laegers TRX 250R (Sparks 330) N/F cr500 link.
1999 Honda Laegers TRX 250R (Sparks 330) N/F cr500 link.
2016 Yamaha Laeger's Banshee YFZ 350 (DRI 350) N/F cr500 link.
Power User
Roostin Away
Thanks Gordon, I'm finally getting somewhere with It
Last edited by Jason Hall; 06-24-2008 at 09:24 PM.
83 ATC 60-R Cr60 converted with Zinger parts.
83 ATC 70.
83 Tri zinger
ATC 85-R Cr85 engine on shortened 86-R frame.
ATC450AF
86 310-R Drag racer
440 snowmobile powered custom built.
87 Cr 500 Converted to Drag racer
Power User
Roostin Away
Finally got It off the bench. Now I can start fitting the subframe & shrouds
83 ATC 60-R Cr60 converted with Zinger parts.
83 ATC 70.
83 Tri zinger
ATC 85-R Cr85 engine on shortened 86-R frame.
ATC450AF
86 310-R Drag racer
440 snowmobile powered custom built.
87 Cr 500 Converted to Drag racer
Always finding new and exciting ways to not give a hoot in hell
Catch me if you can
Dude Jason...leave it that way and finish it. TRIALS TRIKE! Haha it'd be sweet!
One can only beat their head up against the wall so often before they get blood in their eyes.
Note to members: Stupidity is a BANABLE offense, mods can decide if YOU are being stupid and WILL ban you!
Sickest custom 450R ever.
Arm chair racerJust too addicted
Originally Posted by Jason Hall
Finally got It off the bench. Now I can start fitting the subframe & shrouds
Looks great Jason, so whats the deal on the front caliper are you going to run it
on the front - right hand side?
1986 ATC 70
1985 ATC 250R - Hondaline Special
1985 ATC 250R - Flat Track 'Privateer'
1985 ATC 250R - HRC 450RR.
1986 ATC 250R - HRC Flat Track.
1998 Honda Laegers TRX 250R (CT 350 PV) N/F cr500 link.
1998 Honda Laegers TRX 250R (Sparks 330) N/F cr500 link.
1999 Honda Laegers TRX 250R (Sparks 330) N/F cr500 link.
2016 Yamaha Laeger's Banshee YFZ 350 (DRI 350) N/F cr500 link.
Power User
Roostin Away
Billy, It does look like a Trials bike for sure. I'm gettin to old to have no seat though
Gordon, I need to ride It before I decide to run the axle leading or trailing. The bike frame has alot of rake built Into It. That rake makes the wheel base longer than I like. I have learned the hard way with the other bikes I've built that with the extra rake the trailing axle should work out best, I hope
83 ATC 60-R Cr60 converted with Zinger parts.
83 ATC 70.
83 Tri zinger
ATC 85-R Cr85 engine on shortened 86-R frame.
ATC450AF
86 310-R Drag racer
440 snowmobile powered custom built.
87 Cr 500 Converted to Drag racer
Power User
Roostin Away
Jason, looking real good. Do I see the footpegs I sent? If so, did they bolt right up? Hoped you could make use of some of the stuff. More pics brutha.
Power User
Roostin Away
Yes Speedbump they are your footpegs. I had to grind them thinner (where the pin goes through) to make them fit the 450 frame. The pegs need to go way forward though.
83 ATC 60-R Cr60 converted with Zinger parts.
83 ATC 70.
83 Tri zinger
ATC 85-R Cr85 engine on shortened 86-R frame.
ATC450AF
86 310-R Drag racer
440 snowmobile powered custom built.
87 Cr 500 Converted to Drag racer
Power User
Roostin Away
A couple updated Pic's. The gas tank Is made from cardboard don't laugh, and no It won't hold gas
83 ATC 60-R Cr60 converted with Zinger parts.
83 ATC 70.
83 Tri zinger
ATC 85-R Cr85 engine on shortened 86-R frame.
ATC450AF
86 310-R Drag racer
440 snowmobile powered custom built.
87 Cr 500 Converted to Drag racer
New to the board
Arm chair racerNew to the board
Sickkkkkkkk
Need Any 350x Parts? Lol
Always finding new and exciting ways to not give a hoot in hell
Catch me if you can
looks bad ass Jason! Awesome work as always.
One can only beat their head up against the wall so often before they get blood in their eyes.
Note to members: Stupidity is a BANABLE offense, mods can decide if YOU are being stupid and WILL ban you!
At The Back Of The Pack
Arm chair racerAt the back of the pack
that is one beautiful piece of machinery right there
1985 Honda ATC200S
1994 Kawasaki Eliminator EL250
Sickest custom 450R ever.
Arm chair racerJust too addicted
Wow,,,,looks excellent Jason, can't wait to see the rear plastics fitted.
1986 ATC 70
1985 ATC 250R - Hondaline Special
1985 ATC 250R - Flat Track 'Privateer'
1985 ATC 250R - HRC 450RR.
1986 ATC 250R - HRC Flat Track.
1998 Honda Laegers TRX 250R (CT 350 PV) N/F cr500 link.
1998 Honda Laegers TRX 250R (Sparks 330) N/F cr500 link.
1999 Honda Laegers TRX 250R (Sparks 330) N/F cr500 link.
2016 Yamaha Laeger's Banshee YFZ 350 (DRI 350) N/F cr500 link.
Power User
Teaching quads a lesson
holy cow man, that thing is turning out absolutely awesome!!!!
1985 KXT 250 Tecate - kx cylinder, kx ignition, bassani headpipe, answer silencer, v-force reeds, 38mm airstyker carb, +2 franks swinger, raptor rear shock.
1996 YSF240 Blaster - maxxed out!!!
Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "HOLY SH-T, what a ride!"
