I was fortunate to find a good stash of Tecate's last fall and have been sitting on them ever since just thinking and thinking about what I was gonna do with them.I have been asking lot's of question's and taking note's,looking at past thread's ,seeing what worked and what did'nt work on upgrade's and mod's.Around the 1st of the year I started putting my idea's on paper and it was'nt long after that,I pulled out the cut-off wheel,grinder,torche's and welder and started going to town .It's like another 600X build all over again,and I love it..
I started off with a '85 chasis for the build,it was in decent shape ,dirty but solid.First thing I noticed during dis-assembly was the weight of the stock tripple's.I was floored ,and I did'nt like the set-up of the rear suspension either.I've read thread after thread after thread on how to get a 300EX shock to fit the stock chasis,but i decided to rework the whole rear.
So the 1st thing I needed to do was to get this chasis as a roller,it's funny how going from paper to the actual chasis rarely ever work's,but none the less I'm making some headway.I stretched the swinger about 3 inche's ,built in cross bracing on the bottomside and boxed it out.As far as the bottom shock mount,that was wacked off and I went with an adjustable setting bottom mount.The one in the picture is the 1st mock up and has since been changed,but it's along the same line's.With the set-up I have it open's a new door to the shock combination's that I can use.I don't have any new pic's of the swinger ,but that's the general idea.And with that mod ,I will still be able to have the stock airbox,nothing really get's deleted because of room.
The front is totaly getting reworked also,the stock radiator is gone and a narrow front end is now in place.I just got a KX 250 tank and radiators and that's where I'm at rite now.I set it up on the machine and with a little bit of work I ain't seeing any major issue's.I already know about the gas petcock/exhaust issue ,but that's gonna be an easy mod,if all goes good.
That's pretty much where I'm at now,i'll keep everyone posted and get some more pic's when I get a chance ,but it's a roller.So now you guy's got a clue on my Tecate's,LOL..But I am thinking this machine is gonna be a sweet MX'r when it's all said and done.You guy's have question's or suggestion's ,let me know,thus far it's pretty much your idea's that got me this far in the 1st place..