Nice job there. Good luck and keep it going, hope you found a place to keep your projects.
Nice job there. Good luck and keep it going, hope you found a place to keep your projects.
Xmode, your frame Is a 02-04. The 05 frame has a different front engine mount, the bolt goes straight through the frame without mounting plate's. The reason It looks like he built negative rake Into his triple's Is because the CRF fork tubes are smaller In diameter at the top triple than they are at the bottom one. He Is setting his up In the beginning with the axle leading, so as long as he puts the top rear shock mount In the correct spot, he wont make the same mistake I did. I already had my rear shock mounted, so I couldn't tip the frame to set my rake and wheel base correctly. If he sets the frame up with steeper rake, the front lower engine cradle will be tipped downward slightly, but won't hurt a thing!!! Looks Nice Xmode!!!
I will be starting to hack on my 05 frame as soon as I get caught up on a few project's. Here Is a pic of a 05 frame. They're alot lighter, and have a bit steeper rake angle.
83 ATC 60-R Cr60 converted with Zinger parts.
83 ATC 70.
83 Tri zinger
ATC 85-R Cr85 engine on shortened 86-R frame.
ATC450AF
86 310-R Drag racer
440 snowmobile powered custom built.
87 Cr 500 Converted to Drag racer
jason i didnt know that it was a 02-04...they told me that it was a 05....
See My Project At http://www.3wheelerworldforums.com/s...ad.php?t=94144
1986 Kawasaki tecate 3 250cc 2007 Yamaha YZF 450 2005 Honda cfr 450 x
See My Project At http://www.3wheelerworldforums.com/s...ad.php?t=94144
1986 Kawasaki tecate 3 250cc 2007 Yamaha YZF 450 2005 Honda cfr 450 x
the front brake disk...finished!
See My Project At http://www.3wheelerworldforums.com/s...ad.php?t=94144
1986 Kawasaki tecate 3 250cc 2007 Yamaha YZF 450 2005 Honda cfr 450 x
See My Project At http://www.3wheelerworldforums.com/s...ad.php?t=94144
1986 Kawasaki tecate 3 250cc 2007 Yamaha YZF 450 2005 Honda cfr 450 x
Looks like it will be a nice machine when it's done,, keep up the good work
My rides, 1985 ATC 350X, With legit Lamborghini Countach paint,2003 Harley Davidson FXDL Dyna Low Rider,customised the way I like it! 1997 GMC Sierra is gone, primary mode of transportation, 2008 Toyota Yaris!
Check out my build thread of my 350X
http://www.3wheelerworld.com/showthread.php?95389-Tank-s-1985-350X-build-is-FINALLY-all-done!-)
Screw giving away the Harley, It's payed for!!
very very nice...
how much for a set of triples shipped to the USA? lol
I love that design
Feedback thread: http://www.3wheelerworldforums.com/s...ad.php?t=78535
Patiently waiting..
goat i think that you are joking......you like my plates so much?very very nice...
how much for a set of triples shipped to the USA? lol
I love that design
rear shock crazy project....?
Last edited by xmode; 05-06-2009 at 04:46 PM.
See My Project At http://www.3wheelerworldforums.com/s...ad.php?t=94144
1986 Kawasaki tecate 3 250cc 2007 Yamaha YZF 450 2005 Honda cfr 450 x
last days progress
waiting for your comments.....
See My Project At http://www.3wheelerworldforums.com/s...ad.php?t=94144
1986 Kawasaki tecate 3 250cc 2007 Yamaha YZF 450 2005 Honda cfr 450 x
looks awesome man!!!
Good job dude!
My feedback: http://www.3wheelerworld.com/showthr...k-for-ATC-Eric
Survivor! TF: 07, 08, 09, 10, 11, 12, 13 Sandpuppies: 07, 08, 09, 10, 11, 16, 17, 18 Imperial Invasion 09, 10, 11, 13, 15, 16, 17, 18, 19, 20
Everything Big Bore on FaceBook
those tripples are bad ass.... The rake is a bit wierd though.
looks like your planning on using the crf rear shock, any worries abou this with the extra weight that it will be carring? Im using a peps valved 400ex shock with a custom mount somewhat like jason's. My big issue right now, the only thing really stoping me from riding it is that i cannot fidgure out a decent air filter set up and my rear brake. I am using trx450r pegs(move the mount foward and down from the stock crf placement) and cannot fidgure out how to get a brake lever to clear with out making my own. I know that when speedbump did his cr250 conversion he tried using the stock cr pegs and did not like them at all.
Good luck its fun and really exciting to watch come together especially after you can sit on it. just dont rush it.
2005 CRF450R Alum Frame build done, switching to inverts.
86 trx250r fmf fatty fmf q k&n v force reeds gold valve rear shock with eibach spring.
86 atc250r stock sand only
88 NX250 mint rainy day
85 kawi js550 stand up basicly stock
87 kawi js550 scary fast for a stand up
Also jason is right about the frame, mines an 05 and like jason said the front mount goes through a tab on the frame(no plates). Also if you plan to us the trx450r exhaust it mounted up great on my head pipe and all, just have to use an 06 and up trx450r or er water pump cover with a spacer on the impeller to get the radiator hoses routed around it.
2005 CRF450R Alum Frame build done, switching to inverts.
86 trx250r fmf fatty fmf q k&n v force reeds gold valve rear shock with eibach spring.
86 atc250r stock sand only
88 NX250 mint rainy day
85 kawi js550 stand up basicly stock
87 kawi js550 scary fast for a stand up